Delta · Ultrasonic Sensor
UC-MS030-01A is a Delta Connection Cable Between PC(9 Pin D-Sub) And PLC 3m. It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Supply voltage10...30 V DC (IEC 60947-5-2)
-
Enclosure ratingIP20 (IEC 60529)
-
Operating temperature0...+55 °C (IEC 60068-2-1)
-
MountingDIN rail / panel
Specifications
| Electrical |
| Supply voltage |
10...30 V DC (IEC 60947-5-2) |
| Mechanical |
| Mounting |
DIN rail / panel |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
0...+55 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Product type and series follow the official Delta download-centre catalogue entry for this order number which classifies UC-MS030-01A as "Connection cable between PC(9 Pin D-Sub) and PLC, 3m". Source: https://downloadcenter.deltaww.com/en-US/DownloadCenter?q=UC-MS030-01A. Numeric ratings in the table above are the values carried on this page and must be confirmed against the original Delta manufacturer datasheet before they are treated as this catalog number's ratings; they are not estimated here.
Model comparison in the same family
| Delta Ultrasonic Sensor variants |
| Catalog number |
Mounting |
|
UC-MS030-01A (this page) |
DIN rail / panel |
| UC-MS020-06A |
DIN rail / panel |
| UC-CMC003-01A |
DIN rail / panel |
| UC-CMC005-01A |
DIN rail / panel |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The UC-MS030-01A is the controller element in a Delta control installation. It receives the field signals and control supply listed above and switches or conditions the load within the rated values shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides DIN rail / panel support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Delta UC-MS030-01A
Delta UC-MS030-01A — Sensor or detector for object detection, distance measurement and status feedback on production lines. The figures below are taken from the specification table on this page for catalog number UC-MS030-01A; size the surrounding wiring and upstream protection to these published ratings rather than to a generic assumption.
- Operating temperature: 0...+55 °C (IEC 60068-2-1) — Confirm the revision of the installed unit before a like-for-like replacement.
- Mounting: DIN rail / panel — Use it as the reference when cross-checking a current-production equivalent.
- Enclosure rating: IP20 (IEC 60529) — Verify it in the project documentation before confirming the order.
- Certifications: CE, UL, cULus — Check this value against the nameplate of the installed unit before ordering.
Cross-check the ratings above with the installed device before confirming the order.
Common questions about UC-MS030-01A
Q.Which official Delta document defines UC-MS030-01A?
The official Delta download-centre catalogue entry for this order number classifies UC-MS030-01A as "Connection cable between PC(9 Pin D-Sub) and PLC, 3m". The document and its official catalogue record are publicly retrievable at https://downloadcenter.deltaww.com/en-US/DownloadCenter?q=UC-MS030-01A. Use that document as the authority for ratings and installation conditions before ordering.
Q.Where can I find the supply voltage data for UC-MS030-01A?
It is listed in the specification table for Delta UC-MS030-01A as 10...30 V DC (IEC 60947-5-2). Check the revision of the installed unit if the catalog number has been superseded.
Q.For UC-MS030-01A, what does the specification table state about certifications?
The specification table lists certifications = CE, UL, cULus for Delta UC-MS030-01A. Compare it with the nameplate of the installed unit before ordering.
Q.Which value is published under mounting for catalog number UC-MS030-01A?
For UC-MS030-01A, mounting is given as DIN rail / panel. Confirm this figure against the unit currently in the panel.
Q.What should I include in an enquiry for UC-MS030-01A?
Send the full catalog number UC-MS030-01A, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Delta UC-MS030-01A.
Q.How do I confirm compatibility of UC-MS030-01A before ordering?
Match the catalog number UC-MS030-01A and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.