Delta · Ultrasonic Sensor
UC-MS020-06A is a Delta Ultrasonic Sensor. It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Supply voltage10...30 V DC (IEC 60947-5-2)
-
Enclosure ratingIP20 (IEC 60529)
-
Operating temperature0...+55 °C (IEC 60068-2-1)
-
MountingDIN rail / panel
Specifications
| Electrical |
| Supply voltage |
10...30 V DC (IEC 60947-5-2) |
| Mechanical |
| Mounting |
DIN rail / panel |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
0...+55 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Product type and series follow the official Delta download-centre catalogue search for this model which lists UC-MS020-06A under the Delta product line; the product type published for this catalog number is "Ultrasonic Sensor". Source: https://downloadcenter.deltaww.com/en-US/DownloadCenter?q=UC-MS020-06A. Numeric ratings in the table above are the values carried on this page and must be confirmed against the original Delta manufacturer datasheet before they are treated as this catalog number's ratings; they are not estimated here.
Model comparison in the same family
| Delta Ultrasonic Sensor variants |
| Catalog number |
Mounting |
|
UC-MS020-06A (this page) |
DIN rail / panel |
| UC-MS030-01A |
DIN rail / panel |
| UC-CMC003-01A |
DIN rail / panel |
| UC-CMC005-01A |
DIN rail / panel |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The UC-MS020-06A is the sensing element in a Delta installation. It detects the physical condition of the monitored object and reports it to the controller, so the sensor range, wiring and mounting are sized to the values stated in the manufacturer documentation, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides DIN rail / panel support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Delta UC-MS020-06A
Delta UC-MS020-06A — Sensor or detector for object detection, distance measurement and status feedback on production lines. The figures below are taken from the specification table on this page for catalog number UC-MS020-06A; verify the catalog number against your bill of materials before requesting a quotation.
- Supply voltage: 10...30 V DC (IEC 60947-5-2) — Check this value against the nameplate of the installed unit before ordering.
- Enclosure rating: IP20 (IEC 60529) — Match it to the existing panel and upstream protection.
- Operating temperature: 0...+55 °C (IEC 60068-2-1) — Record it with the other nameplate data when sourcing a replacement.
- Certifications: CE, UL, cULus — Confirm the revision of the installed unit before a like-for-like replacement.
Available from stock with datasheet, certificates and a quotation on request.
Common questions about UC-MS020-06A
Q.Which official Delta document defines UC-MS020-06A?
The official Delta download-centre catalogue search for this model lists UC-MS020-06A under the Delta product line, and the product type published for this catalog number is "Ultrasonic Sensor". The document and its official catalogue record are publicly retrievable at https://downloadcenter.deltaww.com/en-US/DownloadCenter?q=UC-MS020-06A. Use that document as the authority for ratings and installation conditions before ordering.
Q.For UC-MS020-06A, what does the specification table state about certifications?
The specification table lists certifications = CE, UL, cULus for Delta UC-MS020-06A. Compare it with the nameplate of the installed unit before ordering.
Q.Which value is published under supply voltage for catalog number UC-MS020-06A?
For UC-MS020-06A, supply voltage is given as 10...30 V DC (IEC 60947-5-2). Confirm this figure against the unit currently in the panel.
Q.Before ordering UC-MS020-06A, which operating temperature entry should be checked?
The operating temperature entry quoted above is 0...+55 °C (IEC 60068-2-1). Use the value as the reference when sourcing a current-production equivalent.
Q.Can the UC-MS020-06A replace the unit currently installed in my panel?
Compare catalog number UC-MS020-06A and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.
Q.What should I include in an enquiry for UC-MS020-06A?
Send the full catalog number UC-MS020-06A, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Delta UC-MS020-06A.