Delta · ECMA servo motors
ECMA-G21309SS is a Delta servo motor with rated speed 1000 rpm and encoder type 17-bit incremental. It is used in CNC axes, robot arms, feeding and indexing drives where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Rated speed1000 rpm
-
Encoder type17-bit incremental
-
Rated motor voltage class220 V
-
Enclosure ratingIP65 (IEC 60529)
Specifications
| Electrical |
| Rated motor voltage class |
220 V |
| Rated speed |
1000 rpm |
| Encoder type |
17-bit incremental |
| Mechanical |
| Enclosure rating |
IP65 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
0...+40 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Rated speed and encoder type are listed where supported by Delta documentation for the model code.
Model comparison in the same family
| ECMA servo motors |
| Catalog number |
Encoder type |
Rated speed |
|
ECMA-G21309SS (this page) |
17-bit incremental |
1000 rpm |
| ECMA-G21309RS |
17-bit incremental |
1000 rpm |
| ECMA-G21306ES |
17-bit incremental |
1000 rpm |
| ECMA-G21306RS |
17-bit incremental |
1000 rpm |
Before choosing a replacement, check the exact model in the manufacturer mounting drawing and terminal diagram.
Where it sits in the control system
The ECMA-G21309SS is the device-level element in a Delta servo motor installation. Match the motor and servo drive using the manufacturer model and connection diagrams. Delta manufacturer documentation. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in CNC axes, robot arms, feeding and indexing drives, where the unit is matched to the original catalog number and the enclosure provides standard panel or DIN-rail support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Delta ECMA-G21309SS
Delta ECMA-G21309SS — Servo and motion-control component for high-accuracy positioning and synchronised movement. The figures below are taken from the specification table on this page for catalog number ECMA-G21309SS; verify the catalog number against your bill of materials before requesting a quotation.
- Operating temperature: 0...+40 °C (IEC 60068-2-1) — Use it as the reference when cross-checking a current-production equivalent.
- Certifications: CE, UL, cULus — Check this value against the nameplate of the installed unit before ordering.
- Rated speed: 1000 rpm — Check the complete model number when selecting a replacement.
Available from stock with datasheet, certificates and a quotation on request.
Common questions about ECMA-G21309SS
Q.Where can I find the enclosure rating data for ECMA-G21309SS?
It is listed in the specification table for Delta ECMA-G21309SS as IP65 (IEC 60529). Check the revision of the installed unit if the catalog number has been superseded.
Q.For ECMA-G21309SS, what does the specification table state about operating temperature?
The specification table lists operating temperature = 0...+40 °C (IEC 60068-2-1) for Delta ECMA-G21309SS. Compare it with the nameplate of the installed unit before ordering.
Q.How do I confirm compatibility of ECMA-G21309SS before ordering?
Match the catalog number ECMA-G21309SS and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.
Q.Can the ECMA-G21309SS replace the unit currently installed in my panel?
Compare catalog number ECMA-G21309SS and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.