Delta · DVP Slim Series PLC
DVPPS01 is a Delta Power supply module. It is used in packaging machines, conveyor transfer cells, small process skids where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Enclosure ratingIP20 (IEC 60529)
-
Mounting35 mm DIN rail (IEC 60715)
Specifications
| Electrical |
| Input voltage range |
85...264 V AC / 110...300 V DC (IEC 61010) |
| Efficiency |
up to 94 % |
| Mechanical |
| Mounting |
35 mm DIN rail (IEC 60715) |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
0...+55 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Product type and series follow official Delta document DVP-0965530-01 (Installation Instructions, issued 2023-03-07), which classifies DVPPS01 as "Power supply module". Source: https://downloadcenter.deltaww.com/en-US/DownloadCenter?q=DVPPS01. Numeric ratings in the table above are placeholders and must still be confirmed against the original manufacturer datasheet before they are treated as this catalog number's ratings; they are not estimated here.
Model comparison in the same family
| Delta DVP Slim Series PLC variants |
| Catalog number |
Supply voltage |
|
DVPPS01 (this page) |
— |
| DVPPS05 |
— |
| DVPPF02-SL |
24 V DC (IEC 61131-2) |
| DVP-F232 |
24 V DC (IEC 61131-2) |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The DVPPS01 is the power-supply element in a Delta control installation. It takes the incoming mains supply and provides the control supply that the mounted modules and the controller run on. Upstream protection and the supply conductor are sized to the input voltage range in the Specifications table, not to a generic assumption.
Typical installations place it in packaging machines, conveyor transfer cells, small process skids, where the unit is matched to the original catalog number and the enclosure provides 35 mm DIN rail (IEC 60715) support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Delta DVPPS01
Delta DVPPS01 Power supply module. See the manufacturer documentation for this order number.
- Mounting: 35 mm DIN rail (IEC 60715) — Confirm the revision of the installed unit before a like-for-like replacement.
- Operating temperature: 0...+55 °C (IEC 60068-2-1) — Use it as the reference when cross-checking a current-production equivalent.
- Input voltage range: 85...264 V AC / 110...300 V DC (IEC 61010) — Verify it in the project documentation before confirming the order.
- Efficiency: up to 94 % — Check this value against the nameplate of the installed unit before ordering.
Datasheets and compliance documents are available on request; quote the full catalog number when enquiring.
Common questions about DVPPS01
Q.Which official Delta document defines DVPPS01?
The official Delta document DVP-0965530-01 (Installation Instructions, issued 2023-03-07) classifies DVPPS01 as "Power supply module". The document and its official catalogue record are publicly retrievable at https://downloadcenter.deltaww.com/en-US/DownloadCenter?q=DVPPS01. Use that document as the authority for ratings and installation conditions before ordering.
Q.Before ordering DVPPS01, which operating temperature entry should be checked?
The operating temperature entry in the table above still has to be confirmed against the original Delta manufacturer documentation for DVPPS01 before it is treated as the rating of this catalog number. The official document cited below is the reference; the value shown above is a placeholder pending that confirmation.
Q.Where can I find the input voltage range data for DVPPS01?
The input voltage range entry in the table above still has to be confirmed against the original Delta manufacturer documentation for DVPPS01 before it is treated as the rating of this catalog number. The official document cited below is the reference; the value shown above is a placeholder pending that confirmation.
Q.How do I confirm compatibility of DVPPS01 before ordering?
Match the catalog number DVPPS01 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.
Q.What should I include in an enquiry for DVPPS01?
Send the full catalog number DVPPS01, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Delta DVPPS01.