Delta · DVP-EC3 Series PLC
DVP14EC00R3 is a Delta 14 I/O Basic Type PLC. It is used in packaging machines, conveyor transfer cells, small process skids where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Total I/O14
-
Supply voltage24 V DC (IEC 61131-2)
-
Enclosure ratingIP20 (IEC 60529)
Specifications
| Electrical |
| Total I/O |
14 |
| Supply voltage |
24 V DC (IEC 61131-2) |
Total I/O |
14 |
| Mechanical |
| Mounting |
35 mm DIN rail (IEC 60715) |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
0...+55 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Product type and series follow the official Delta download-centre catalogue entry for this order number which classifies DVP14EC00R3 as "14 I/O basic type PLC". Source: https://downloadcenter.deltaww.com/en-US/DownloadCenter?q=DVP14EC00R3. Numeric ratings in the table above are the values carried on this page and must be confirmed against the original Delta manufacturer datasheet before they are treated as this catalog number's ratings; they are not estimated here.
Model comparison in the same family
| Delta DVP-EC3 Series PLC variants |
| Catalog number |
Total I/O |
Supply voltage |
|
DVP14EC00R3 (this page) |
14 |
24 V DC (IEC 61131-2) |
DVP107BV
| 24 V DC (IEC 61131-2) |
DVP10MC11T
| 24 V DC (IEC 61131-2) |
DVP10SX11T
| 24 V DC (IEC 61131-2) |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The DVP14EC00R3 is the controller element in a Delta control installation. It receives the field signals and control supply listed above and switches or conditions the load within the rated values shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in packaging machines, conveyor transfer cells, small process skids, where the unit is matched to the original catalog number and the enclosure provides 35 mm DIN rail (IEC 60715) support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Delta DVP14EC00R3
Delta DVP14EC00R3 — PLC / CPU module used as the device-level control core in an automation panel, handling logic, timing and communication tasks. The figures below are taken from the specification table on this page for catalog number DVP14EC00R3; always cross-check the catalog number and hardware revision on the nameplate before placing an order.
- Mounting: 35 mm DIN rail (IEC 60715) — Verify it in the project documentation before confirming the order.
- Supply voltage: 24 V DC (IEC 61131-2) — Check this value against the nameplate of the installed unit before ordering.
- Certifications: CE, UL, cULus — Match it to the existing panel and upstream protection.
- Total I/O: 14 — Record it with the other nameplate data when sourcing a replacement.
Datasheets and compliance documents are available on request; quote the full catalog number when enquiring.
Common questions about DVP14EC00R3
Q.Which official Delta document defines DVP14EC00R3?
The official Delta download-centre catalogue entry for this order number classifies DVP14EC00R3 as "14 I/O basic type PLC". The document and its official catalogue record are publicly retrievable at https://downloadcenter.deltaww.com/en-US/DownloadCenter?q=DVP14EC00R3. Use that document as the authority for ratings and installation conditions before ordering.
Q.What does the official Delta catalogue state about the point configuration of DVP14EC00R3?
The official Delta download-centre record for DVP14EC00R3 describes this order number as "14 I/O basic type PLC", so the specification table lists Total I/O = 14. Source: https://downloadcenter.deltaww.com/en-US/DownloadCenter?q=DVP14EC00R3
Q.Before ordering DVP14EC00R3, which certifications entry should be checked?
The certifications entry quoted above is CE, UL, cULus. Use the value as the reference when sourcing a current-production equivalent.
Q.Where can I find the supply voltage data for DVP14EC00R3?
It is listed in the specification table for Delta DVP14EC00R3 as 24 V DC (IEC 61131-2). Check the revision of the installed unit if the catalog number has been superseded.
Q.How do I confirm compatibility of DVP14EC00R3 before ordering?
Match the catalog number DVP14EC00R3 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.
Q.Can the DVP14EC00R3 replace the unit currently installed in my panel?
Compare catalog number DVP14EC00R3 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.