Delta · DVP-EXP
DVP-12SA2 is a Delta PLC Controller. It is used in packaging machines, conveyor transfer cells, small process skids where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Supply voltage24 V DC (IEC 61131-2)
-
Enclosure ratingIP20 (IEC 60529)
-
Mounting35 mm DIN rail (IEC 60715)
Specifications
| Electrical |
| Supply voltage |
24 V DC (IEC 61131-2) |
| Mechanical |
| Mounting |
35 mm DIN rail (IEC 60715) |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
0...+55 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Product type and series follow the official Delta download-centre catalogue search for this model which lists DVP-12SA2 under the Delta product line; the product type published for this catalog number is "PLC Controller". Source: https://downloadcenter.deltaww.com/en-US/DownloadCenter?q=DVP-12SA2. Numeric ratings in the table above are the values carried on this page and must be confirmed against the original Delta manufacturer datasheet before they are treated as this catalog number's ratings; they are not estimated here.
Model comparison in the same family
| Delta DVP-EXP variants |
| Catalog number |
Supply voltage |
|
DVP-12SA2 (this page) |
24 V DC (IEC 61131-2) |
| DVP-12SA211R |
24 V DC (IEC 61131-2) |
| DVP-12SA11R |
24 V DC (IEC 61131-2) |
| DVP-12SE11R |
24 V DC (IEC 61131-2) |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The DVP-12SA2 is the controller element in a Delta control installation. It receives the field signals and control supply listed above and switches or conditions the load within the rated values shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in packaging machines, conveyor transfer cells, small process skids, where the unit is matched to the original catalog number and the enclosure provides 35 mm DIN rail (IEC 60715) support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Delta DVP-12SA2
Delta DVP-12SA2 — PLC / CPU module used as the device-level control core in an automation panel, handling logic, timing and communication tasks. The figures below are taken from the specification table on this page for catalog number DVP-12SA2; size the surrounding wiring and upstream protection to these published ratings rather than to a generic assumption.
- Certifications: CE, UL, cULus — Record it with the other nameplate data when sourcing a replacement.
- Supply voltage: 24 V DC (IEC 61131-2) — Confirm the revision of the installed unit before a like-for-like replacement.
- Operating temperature: 0...+55 °C (IEC 60068-2-1) — Use it as the reference when cross-checking a current-production equivalent.
- Mounting: 35 mm DIN rail (IEC 60715) — Verify it in the project documentation before confirming the order.
Available from stock with datasheet, certificates and a quotation on request.
Common questions about DVP-12SA2
Q.Which official Delta document defines DVP-12SA2?
The official Delta download-centre catalogue search for this model lists DVP-12SA2 under the Delta product line, and the product type published for this catalog number is "PLC Controller". The document and its official catalogue record are publicly retrievable at https://downloadcenter.deltaww.com/en-US/DownloadCenter?q=DVP-12SA2. Use that document as the authority for ratings and installation conditions before ordering.
Q.Where can I find the mounting data for DVP-12SA2?
It is listed in the specification table for Delta DVP-12SA2 as 35 mm DIN rail (IEC 60715). Confirm this figure against the unit currently in the panel.
Q.For DVP-12SA2, what does the specification table state about supply voltage?
The specification table lists supply voltage = 24 V DC (IEC 61131-2) for Delta DVP-12SA2. Use the value as the reference when sourcing a current-production equivalent.
Q.Which value is published under enclosure rating for catalog number DVP-12SA2?
For DVP-12SA2, enclosure rating is given as IP20 (IEC 60529). Check the revision of the installed unit if the catalog number has been superseded.
Q.Can the DVP-12SA2 replace the unit currently installed in my panel?
Compare catalog number DVP-12SA2 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.
Q.How do I confirm compatibility of DVP-12SA2 before ordering?
Match the catalog number DVP-12SA2 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.