Delta · DVP Slim Series PLC
DVP-04DA-S is a Delta Analog output module, 4 AO. It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Supply voltage24 V DC (IEC 61131-2)
-
Enclosure ratingIP20 (IEC 60529)
-
Operating temperature0...+55 °C (IEC 60068-2-1)
-
MountingDIN rail / panel
Specifications
| Electrical |
| Supply voltage |
24 V DC (IEC 61131-2) |
| Mechanical |
| Mounting |
DIN rail / panel |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
0...+55 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Product type and series follow official Delta document DVP-0010330-01 (Installation Instructions, issued 2021-04-01), which classifies DVP-04DA-S as "Analog output module, 4 AO". Source: https://downloadcenter.deltaww.com/en-US/DownloadCenter?q=DVP04DA-S. Numeric ratings in the table above are placeholders and must still be confirmed against the original manufacturer datasheet before they are treated as this catalog number's ratings; they are not estimated here.
Model comparison in the same family
| Delta DVP Slim Series PLC variants |
| Catalog number |
Mounting |
|
DVP-04DA-S (this page) |
DIN rail / panel |
| DVP-04DA-S2 |
DIN rail / panel |
| DVP-04AD |
DIN rail / panel |
| DVP-04AD-S |
DIN rail / panel |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The DVP-04DA-S is the I/O element in a Delta control installation. It terminates the field signals listed above and hands them to the controller, so field wiring and protective devices are sized to the ratings in the Specifications table, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides DIN rail / panel support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Delta DVP-04DA-S
Delta DVP-04DA-S Analog output module, 4 AO. See the manufacturer documentation for this order number.
- Operating temperature: 0...+55 °C (IEC 60068-2-1) — Check this value against the nameplate of the installed unit before ordering.
- Certifications: CE, UL, cULus — Match it to the existing panel and upstream protection.
- Mounting: DIN rail / panel — Record it with the other nameplate data when sourcing a replacement.
- Enclosure rating: IP20 (IEC 60529) — Confirm the revision of the installed unit before a like-for-like replacement.
Datasheets and compliance documents are available on request; quote the full catalog number when enquiring.
Common questions about DVP-04DA-S
Q.Which official Delta document defines DVP-04DA-S?
The official Delta document DVP-0010330-01 (Installation Instructions, issued 2021-04-01) classifies DVP-04DA-S as "Analog output module, 4 AO". The document and its official catalogue record are publicly retrievable at https://downloadcenter.deltaww.com/en-US/DownloadCenter?q=DVP04DA-S. Use that document as the authority for ratings and installation conditions before ordering.
Q.For DVP-04DA-S, what does the specification table state about supply voltage?
The supply voltage entry in the table above still has to be confirmed against the original Delta manufacturer documentation for DVP-04DA-S before it is treated as the rating of this catalog number. The official document cited below is the reference; the value shown above is a placeholder pending that confirmation.
Q.Which value is published under operating temperature for catalog number DVP-04DA-S?
The operating temperature entry in the table above still has to be confirmed against the original Delta manufacturer documentation for DVP-04DA-S before it is treated as the rating of this catalog number. The official document cited below is the reference; the value shown above is a placeholder pending that confirmation.
Q.Before ordering DVP-04DA-S, which enclosure rating entry should be checked?
The enclosure rating entry quoted above is IP20 (IEC 60529). Confirm this figure against the unit currently in the panel.
Q.Can the DVP-04DA-S replace the unit currently installed in my panel?
Compare catalog number DVP-04DA-S and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.
Q.What should I include in an enquiry for DVP-04DA-S?
Send the full catalog number DVP-04DA-S, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Delta DVP-04DA-S.