Delta · Temperature Controller
DTC1000V is a Delta Temperature Controller. It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Supply voltage24 V DC (IEC 61131-2)
-
Enclosure ratingIP20 (IEC 60529)
-
Operating temperature0...+55 °C (IEC 60068-2-1)
-
MountingDIN rail / panel
Specifications
| Electrical |
| Supply voltage |
24 V DC (IEC 61131-2) |
| Mechanical |
| Mounting |
DIN rail / panel |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
0...+55 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Product type and series follow the official Delta download-centre catalogue search for this model which lists DTC1000V under the Delta product line; the product type published for this catalog number is "Temperature Controller". Source: https://downloadcenter.deltaww.com/en-US/DownloadCenter?q=DTC1000V. Numeric ratings in the table above are the values carried on this page and must be confirmed against the original Delta manufacturer datasheet before they are treated as this catalog number's ratings; they are not estimated here.
Model comparison in the same family
| Delta Temperature Controller variants |
| Catalog number |
Mounting |
|
DTC1000V (this page) |
DIN rail / panel |
| DTC1000C |
DIN rail / panel |
| DTC1000L |
DIN rail / panel |
| DTC1000R |
DIN rail / panel |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The DTC1000V is the controller element in a Delta control installation. It receives the field signals and control supply listed above and switches or conditions the load within the rated values shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides DIN rail / panel support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Delta DTC1000V
Delta DTC1000V — PLC / CPU module used as the device-level control core in an automation panel, handling logic, timing and communication tasks. The figures below are taken from the specification table on this page for catalog number DTC1000V; always cross-check the catalog number and hardware revision on the nameplate before placing an order.
- Enclosure rating: IP20 (IEC 60529) — Check this value against the nameplate of the installed unit before ordering.
- Mounting: DIN rail / panel — Match it to the existing panel and upstream protection.
- Operating temperature: 0...+55 °C (IEC 60068-2-1) — Record it with the other nameplate data when sourcing a replacement.
- Supply voltage: 24 V DC (IEC 61131-2) — Confirm the revision of the installed unit before a like-for-like replacement.
For a discontinued unit, match function and electrical ratings rather than the label alone.
Common questions about DTC1000V
Q.Which official Delta document defines DTC1000V?
The official Delta download-centre catalogue search for this model lists DTC1000V under the Delta product line, and the product type published for this catalog number is "Temperature Controller". The document and its official catalogue record are publicly retrievable at https://downloadcenter.deltaww.com/en-US/DownloadCenter?q=DTC1000V. Use that document as the authority for ratings and installation conditions before ordering.
Q.Which value is published under operating temperature for catalog number DTC1000V?
For DTC1000V, operating temperature is given as 0...+55 °C (IEC 60068-2-1). Check the revision of the installed unit if the catalog number has been superseded.
Q.Before ordering DTC1000V, which mounting entry should be checked?
The mounting entry quoted above is DIN rail / panel. Compare it with the nameplate of the installed unit before ordering.
Q.Where can I find the supply voltage data for DTC1000V?
It is listed in the specification table for Delta DTC1000V as 24 V DC (IEC 61131-2). Confirm this figure against the unit currently in the panel.
Q.What should I include in an enquiry for DTC1000V?
Send the full catalog number DTC1000V, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Delta DTC1000V.
Q.Can the DTC1000V replace the unit currently installed in my panel?
Compare catalog number DTC1000V and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.