Delta · Delta switching power supply
DRL24V480W1EN is a Delta variable-frequency drive with Rated operational voltage 1-phase 200-240 V / 3-phase 380-480 V; Overload capacity 150% for 60 s; Enclosure rating IP20 (IEC 60529). It is used in pump sets, conveyor belts, fan and compressor drives where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Rated operational voltage1-phase 200-240 V / 3-phase 380-480 V
-
Overload capacity150% for 60 s
-
Enclosure ratingIP20 (IEC 60529)
-
Frequency50/60 Hz
Specifications
| Electrical |
| Rated operational voltage |
1-phase 200-240 V / 3-phase 380-480 V |
| Input voltage range |
85...264 V AC / 110...300 V DC (IEC 61010) |
| Output current |
0-10.0 A |
| Efficiency |
up to 94 % |
| Frequency |
50/60 Hz |
| Overload capacity |
150% for 60 s |
| Mechanical |
| Dimensions (H x W x D) |
123.6 x 56 x 116.8 mm (4.87 x 2.2 x 4.60 inch) |
| Weight |
0.87 kg (1.91 lb) |
| Mounting |
35 mm DIN rail (IEC 60715) |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
0...+40 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Values follow the Delta Delta switching power supply specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Delta Delta switching power supply variants |
| Catalog number |
Overload capacity |
Rated operational voltage |
Frequency |
|
DRL24V480W1EN (this page) |
150% for 60 s |
1-phase 200-240 V / 3-phase 380-480 V |
50/60 Hz |
| DRL-12V75W1AZ |
— |
— |
— |
| DRL-24V240W1EN |
150% for 60 s |
1-phase 200-240 V / 3-phase 380-480 V |
50/60 Hz |
| DRL-24V24OW1EN |
150% for 60 s |
1-phase 200-240 V / 3-phase 380-480 V |
50/60 Hz |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The DRL24V480W1EN is the device-level element in a Delta variable-frequency drive installation. It receives the field signals and control supply listed above — 1-phase 200-240 V / 3-phase 380-480 V — and switches or conditions the load within the 1-phase 200-240 V / 3-phase 380-480 V ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in pump sets, conveyor belts, fan and compressor drives, where the unit is matched to the original catalog number and the enclosure provides 35 mm DIN rail (IEC 60715) support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Delta DRL24V480W1EN
Delta DRL24V480W1EN — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number DRL24V480W1EN; always cross-check the catalog number and hardware revision on the nameplate before placing an order.
- Certifications: CE, UL, cULus — Use it as the reference when cross-checking a current-production equivalent.
- Efficiency: up to 94 % — Verify it in the project documentation before confirming the order.
- Output current: 0-10.0 A — Check this value against the nameplate of the installed unit before ordering.
- Frequency: 50/60 Hz — Match it to the existing panel and upstream protection.
Available from stock with datasheet, certificates and a quotation on request.
Common questions about DRL24V480W1EN
Q.Which value is published under dimensions (H x W x D) for catalog number DRL24V480W1EN?
For DRL24V480W1EN, dimensions (H x W x D) is given as 123.6 x 56 x 116.8 mm (4.87 x 2.2 x 4.60 inch). Use the value as the reference when sourcing a current-production equivalent.
Q.Before ordering DRL24V480W1EN, which output current entry should be checked?
The output current entry quoted above is 0-10.0 A. Check the revision of the installed unit if the catalog number has been superseded.
Q.Where can I find the overload capacity data for DRL24V480W1EN?
It is listed in the specification table for Delta DRL24V480W1EN as 150% for 60 s. Compare it with the nameplate of the installed unit before ordering.
Q.What should I include in an enquiry for DRL24V480W1EN?
Send the full catalog number DRL24V480W1EN, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Delta DRL24V480W1EN.
Q.Can the DRL24V480W1EN replace the unit currently installed in my panel?
Compare catalog number DRL24V480W1EN and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.