Delta · Delta HMI panel
DOP-107BV-PD02 is a Delta HMI Panel. It is used in machine operator panels, control cabinets, local HMI stations where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Supply voltage24 V DC (IEC 60950-1)
-
Enclosure ratingIP65 (IEC 60529)
-
MountingPanel / DIN rail
Specifications
| Electrical |
| Supply voltage |
24 V DC (IEC 60950-1) |
| Mechanical |
| Mounting |
Panel / DIN rail |
| Enclosure rating |
IP65 (IEC 60529) |
| Touch type |
resistive or projective capacitive |
| Environment and compliance |
| Operating temperature |
0...+50 °C |
| Certifications |
CE, UL, cULus |
Product type and series follow the official Delta download-centre catalogue search for this model which lists DOP-107BV-PD02 under the Delta product line; the product type published for this catalog number is "HMI Panel". Source: https://downloadcenter.deltaww.com/en-US/DownloadCenter?q=DOP-107BV-PD02. Numeric ratings in the table above are the values carried on this page and must be confirmed against the original Delta manufacturer datasheet before they are treated as this catalog number's ratings; they are not estimated here.
Model comparison in the same family
| Delta Delta HMI panel variants |
| Catalog number |
Supply voltage |
|
DOP-107BV-PD02 (this page) |
24 V DC (IEC 60950-1) |
| DOP-107BV |
24 V DC (IEC 60950-1) |
| DOP-1071V |
24 V DC (IEC 60950-1) |
| DOP-107CV |
24 V DC (IEC 60950-1) |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The DOP-107BV-PD02 is the operator-panel element in a Delta control installation. It shows the machine state to the operator and returns the operator entries to the controller, so it is installed and commissioned against the controller documentation, not to a generic assumption.
Typical installations place it in machine operator panels, control cabinets, local HMI stations, where the unit is matched to the original catalog number and the enclosure provides Panel / DIN rail support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Delta DOP-107BV-PD02
Delta DOP-107BV-PD02 — Operator panel for visualisation, parameter setting and alarm handling on a control cabinet door or console. The figures below are taken from the specification table on this page for catalog number DOP-107BV-PD02; size the surrounding wiring and upstream protection to these published ratings rather than to a generic assumption.
- Mounting: Panel / DIN rail — Use it as the reference when cross-checking a current-production equivalent.
- Certifications: CE, UL, cULus — Verify it in the project documentation before confirming the order.
- Operating temperature: 0...+50 °C — Check this value against the nameplate of the installed unit before ordering.
- Supply voltage: 24 V DC (IEC 60950-1) — Match it to the existing panel and upstream protection.
Available from stock with datasheet, certificates and a quotation on request.
Common questions about DOP-107BV-PD02
Q.Which official Delta document defines DOP-107BV-PD02?
The official Delta download-centre catalogue search for this model lists DOP-107BV-PD02 under the Delta product line, and the product type published for this catalog number is "HMI Panel". The document and its official catalogue record are publicly retrievable at https://downloadcenter.deltaww.com/en-US/DownloadCenter?q=DOP-107BV-PD02. Use that document as the authority for ratings and installation conditions before ordering.
Q.Before ordering DOP-107BV-PD02, which certifications entry should be checked?
The certifications entry quoted above is CE, UL, cULus. Compare it with the nameplate of the installed unit before ordering.
Q.Where can I find the mounting data for DOP-107BV-PD02?
It is listed in the specification table for Delta DOP-107BV-PD02 as Panel / DIN rail. Confirm this figure against the unit currently in the panel.
Q.For DOP-107BV-PD02, what does the specification table state about supply voltage?
The specification table lists supply voltage = 24 V DC (IEC 60950-1) for Delta DOP-107BV-PD02. Use the value as the reference when sourcing a current-production equivalent.
Q.What should I include in an enquiry for DOP-107BV-PD02?
Send the full catalog number DOP-107BV-PD02, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Delta DOP-107BV-PD02.
Q.Can the DOP-107BV-PD02 replace the unit currently installed in my panel?
Compare catalog number DOP-107BV-PD02 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.