Delta · Accessories for C2000 Series
CMC-EIP02 is a Delta EtherNet/IP Communication Card. It is used in DIN-rail control cabinets, sensor and relay supplies, backplane bus power where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Enclosure ratingIP20 (IEC 60529)
-
Mounting35 mm DIN rail (IEC 60715)
Specifications
| Mechanical |
| Mounting |
35 mm DIN rail (IEC 60715) |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
0...+55 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Product type and series follow the official Delta download-centre catalogue entry for this order number which classifies CMC-EIP02 as "EtherNet/IP Communication Card Instruction Sheet". Source: https://downloadcenter.deltaww.com/en-US/DownloadCenter?q=CMC-EIP02. Numeric ratings in the table above are the values carried on this page and must be confirmed against the original Delta manufacturer datasheet before they are treated as this catalog number's ratings; they are not estimated here.
Model comparison in the same family
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The CMC-EIP02 is the fieldbus element in a Delta control installation. It carries the bus signals between the controller and the field devices, so the bus topology, cable lengths and termination are sized to the interface parameters stated in the manufacturer documentation, not to a generic assumption.
Typical installations place it in DIN-rail control cabinets, sensor and relay supplies, backplane bus power, where the unit is matched to the original catalog number and the enclosure provides 35 mm DIN rail (IEC 60715) support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Delta CMC-EIP02
Delta CMC-EIP02 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number CMC-EIP02; confirm the installed unit's part number and revision so the replacement matches both electrically and mechanically.
- Certifications: CE, UL, cULus — Check this value against the nameplate of the installed unit before ordering.
- Operating temperature: 0...+55 °C (IEC 60068-2-1) — Record it with the other nameplate data when sourcing a replacement.
For a discontinued unit, match function and electrical ratings rather than the label alone.
Common questions about CMC-EIP02
Q.Which official Delta document defines CMC-EIP02?
The official Delta download-centre catalogue entry for this order number classifies CMC-EIP02 as "EtherNet/IP Communication Card Instruction Sheet". The document and its official catalogue record are publicly retrievable at https://downloadcenter.deltaww.com/en-US/DownloadCenter?q=CMC-EIP02. Use that document as the authority for ratings and installation conditions before ordering.
Q.For CMC-EIP02, what does the specification table state about certifications?
The specification table lists certifications = CE, UL, cULus for Delta CMC-EIP02. Check the revision of the installed unit if the catalog number has been superseded.
Q.Before ordering CMC-EIP02, which mounting entry should be checked?
The mounting entry quoted above is 35 mm DIN rail (IEC 60715). Confirm this figure against the unit currently in the panel.
Q.What should I include in an enquiry for CMC-EIP02?
Send the full catalog number CMC-EIP02, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Delta CMC-EIP02.
Q.How do I confirm compatibility of CMC-EIP02 before ordering?
Match the catalog number CMC-EIP02 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.