Delta · AS Series PLC
AS132R-A is a Delta CPU (RELAY Output). It is used in packaging machines, conveyor transfer cells, small process skids where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Supply voltage24 V DC (IEC 61131-2)
-
Enclosure ratingIP20 (IEC 60529)
-
Mounting35 mm DIN rail (IEC 60715)
Specifications
| Electrical |
| Supply voltage |
24 V DC (IEC 61131-2) |
| Rated speed |
up to 40 k steps / ms |
| Mechanical |
| Mounting |
35 mm DIN rail (IEC 60715) |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
0...+55 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Product type and series follow the official Delta download-centre catalogue entry for this order number which classifies AS132R-A as "CPU (RELAY output)". Source: https://downloadcenter.deltaww.com/en-US/DownloadCenter?q=AS132R-A. Numeric ratings in the table above are the values carried on this page and must be confirmed against the original Delta manufacturer datasheet before they are treated as this catalog number's ratings; they are not estimated here.
Model comparison in the same family
| Delta AS Series PLC variants |
| Catalog number |
Supply voltage |
|
AS132R-A (this page) |
24 V DC (IEC 61131-2) |
| AS164R-A |
24 V DC (IEC 61131-2) |
| AS16AM10N-A |
24 V DC (IEC 61131-2) |
| AS16AM10N-B |
24 V DC (IEC 61131-2) |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The AS132R-A is the controller element in a Delta control installation. It receives the field signals and control supply listed above and switches or conditions the load within the rated values shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in packaging machines, conveyor transfer cells, small process skids, where the unit is matched to the original catalog number and the enclosure provides 35 mm DIN rail (IEC 60715) support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Delta AS132R-A
Delta AS132R-A — PLC / CPU module used as the device-level control core in an automation panel, handling logic, timing and communication tasks. The figures below are taken from the specification table on this page for catalog number AS132R-A; record the nameplate data of the unit being replaced before selecting an equivalent.
- Rated speed: up to 40 k steps / ms — Verify it in the project documentation before confirming the order.
- Certifications: CE, UL, cULus — Check this value against the nameplate of the installed unit before ordering.
- Operating temperature: 0...+55 °C (IEC 60068-2-1) — Match it to the existing panel and upstream protection.
- Supply voltage: 24 V DC (IEC 61131-2) — Record it with the other nameplate data when sourcing a replacement.
For a discontinued unit, match function and electrical ratings rather than the label alone.
Common questions about AS132R-A
Q.Which official Delta document defines AS132R-A?
The official Delta download-centre catalogue entry for this order number classifies AS132R-A as "CPU (RELAY output)". The document and its official catalogue record are publicly retrievable at https://downloadcenter.deltaww.com/en-US/DownloadCenter?q=AS132R-A. Use that document as the authority for ratings and installation conditions before ordering.
Q.For AS132R-A, what does the specification table state about rated speed?
The specification table lists rated speed = up to 40 k steps / ms for Delta AS132R-A. Use the value as the reference when sourcing a current-production equivalent.
Q.Which value is published under mounting for catalog number AS132R-A?
For AS132R-A, mounting is given as 35 mm DIN rail (IEC 60715). Check the revision of the installed unit if the catalog number has been superseded.
Q.Before ordering AS132R-A, which supply voltage entry should be checked?
The supply voltage entry quoted above is 24 V DC (IEC 61131-2). Compare it with the nameplate of the installed unit before ordering.
Q.How do I confirm compatibility of AS132R-A before ordering?
Match the catalog number AS132R-A and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.
Q.Can the AS132R-A replace the unit currently installed in my panel?
Compare catalog number AS132R-A and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.