Delta · AS Series PLC
AS01DNET-A is a Delta DeviceNet communication module. It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Supply voltage24 V DC (IEC 61131-2)
-
Enclosure ratingIP20 (IEC 60529)
-
Operating temperature0...+55 °C (IEC 60068-2-1)
-
MountingDIN rail / panel
Specifications
| Electrical |
| Supply voltage |
24 V DC (IEC 61131-2) |
| Rated speed |
up to 40 k steps / ms |
| Mechanical |
| Mounting |
DIN rail / panel |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
0...+55 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Product type and series follow official Delta document 5014060301 (Installation Instructions, issued 2021-09-24), which classifies AS01DNET-A as "DeviceNet communication module". Source: https://downloadcenter.deltaww.com/en-US/DownloadCenter?q=AS01DNET-A. Numeric ratings in the table above are placeholders and must still be confirmed against the original manufacturer datasheet before they are treated as this catalog number's ratings; they are not estimated here.
Model comparison in the same family
| Delta AS Series PLC variants |
| Catalog number |
Mounting |
|
AS01DNET-A (this page) |
DIN rail / panel |
| AS00SCM-A |
DIN rail / panel |
| AS02LC-A |
DIN rail / panel |
| AS02PU-A |
DIN rail / panel |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The AS01DNET-A is the fieldbus element in a Delta control installation. It carries the bus signals between the controller and the field devices, so the bus topology, cable lengths and termination are sized to the interface parameters in the Specifications table, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides DIN rail / panel support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Delta AS01DNET-A
Delta AS01DNET-A DeviceNet communication module. See the manufacturer documentation for this order number.
- Enclosure rating: IP20 (IEC 60529) — Confirm the revision of the installed unit before a like-for-like replacement.
- Operating temperature: 0...+55 °C (IEC 60068-2-1) — Use it as the reference when cross-checking a current-production equivalent.
- Certifications: CE, UL, cULus — Verify it in the project documentation before confirming the order.
- Supply voltage: 24 V DC (IEC 61131-2) — Check this value against the nameplate of the installed unit before ordering.
Datasheets and compliance documents are available on request; quote the full catalog number when enquiring.
Common questions about AS01DNET-A
Q.Which official Delta document defines AS01DNET-A?
The official Delta document 5014060301 (Installation Instructions, issued 2021-09-24) classifies AS01DNET-A as "DeviceNet communication module". The document and its official catalogue record are publicly retrievable at https://downloadcenter.deltaww.com/en-US/DownloadCenter?q=AS01DNET-A. Use that document as the authority for ratings and installation conditions before ordering.
Q.Which value is published under supply voltage for catalog number AS01DNET-A?
The supply voltage entry in the table above still has to be confirmed against the original Delta manufacturer documentation for AS01DNET-A before it is treated as the rating of this catalog number. The official document cited below is the reference; the value shown above is a placeholder pending that confirmation.
Q.Before ordering AS01DNET-A, which mounting entry should be checked?
The mounting entry quoted above is DIN rail / panel. Use the value as the reference when sourcing a current-production equivalent.
Q.Where can I find the rated speed data for AS01DNET-A?
It is listed in the specification table for Delta AS01DNET-A as up to 40 k steps / ms. Check the revision of the installed unit if the catalog number has been superseded.
Q.How do I confirm compatibility of AS01DNET-A before ordering?
Match the catalog number AS01DNET-A and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.
Q.What should I include in an enquiry for AS01DNET-A?
Send the full catalog number AS01DNET-A, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Delta AS01DNET-A.