Delta · AH Series PLC
AHPS05-5A is a Delta Power supply module. It is used in DIN-rail control cabinets, sensor and relay supplies, backplane bus power where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Efficiency≥90%
-
Input voltage range85...264 V AC
-
Supply voltage100...240 V AC
-
Enclosure ratingIP20 (IEC 60529)
Specifications
| Electrical |
| Supply voltage |
100...240 V AC |
| Input voltage range |
85...264 V AC |
| Efficiency |
≥90% |
| Mechanical |
| Mounting |
35 mm DIN rail (IEC 60715) |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
0...+55 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Product type and series follow official Delta document 5012608503 (Installation Instructions, issued 2022-12-29), which classifies AHPS05-5A as "Power supply module". Source: https://downloadcenter.deltaww.com/en-US/DownloadCenter?q=AHPS05-5A. Numeric ratings in the table above are placeholders and must still be confirmed against the original manufacturer datasheet before they are treated as this catalog number's ratings; they are not estimated here.
Model comparison in the same family
| Delta AH Series PLC variants |
| Catalog number |
Mounting |
|
AHPS05-5A (this page) |
35 mm DIN rail (IEC 60715) |
| AH02HC-5A |
DIN rail / panel |
| AH04AD-5A |
DIN rail / panel |
| AH06XA-5A |
DIN rail / panel |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The AHPS05-5A is the power-supply element in a Delta control installation. It takes the incoming mains supply and provides the control supply that the mounted modules and the controller run on. Upstream protection and the supply conductor are sized to the input voltage range in the Specifications table, not to a generic assumption.
Typical installations place it in DIN-rail control cabinets, sensor and relay supplies, backplane bus power, where the unit is matched to the original catalog number and the enclosure provides 35 mm DIN rail (IEC 60715) support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Delta AHPS05-5A
Delta AHPS05-5A Power supply module. See the manufacturer documentation for this order number.
- Operating temperature: 0...+55 °C (IEC 60068-2-1) — Record it with the other nameplate data when sourcing a replacement.
- Certifications: CE, UL, cULus — Confirm the revision of the installed unit before a like-for-like replacement.
- Enclosure rating: IP20 (IEC 60529) — Use it as the reference when cross-checking a current-production equivalent.
- Supply voltage: 100...240 V AC — Verify it in the project documentation before confirming the order.
Cross-check the ratings above with the installed device before confirming the order.
Common questions about AHPS05-5A
Q.Which official Delta document defines AHPS05-5A?
The official Delta document 5012608503 (Installation Instructions, issued 2022-12-29) classifies AHPS05-5A as "Power supply module". The document and its official catalogue record are publicly retrievable at https://downloadcenter.deltaww.com/en-US/DownloadCenter?q=AHPS05-5A. Use that document as the authority for ratings and installation conditions before ordering.
Q.Which value is published under supply voltage for catalog number AHPS05-5A?
The supply voltage entry in the table above still has to be confirmed against the original Delta manufacturer documentation for AHPS05-5A before it is treated as the rating of this catalog number. The official document cited below is the reference; the value shown above is a placeholder pending that confirmation.
Q.Before ordering AHPS05-5A, which enclosure rating entry should be checked?
The enclosure rating entry quoted above is IP20 (IEC 60529). Use the value as the reference when sourcing a current-production equivalent.
Q.Where can I find the input voltage range data for AHPS05-5A?
The input voltage range entry in the table above still has to be confirmed against the original Delta manufacturer documentation for AHPS05-5A before it is treated as the rating of this catalog number. The official document cited below is the reference; the value shown above is a placeholder pending that confirmation.
Q.How do I confirm compatibility of AHPS05-5A before ordering?
Match the catalog number AHPS05-5A and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.
Q.Can the AHPS05-5A replace the unit currently installed in my panel?
Compare catalog number AHPS05-5A and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.