Beckhoff · EtherCAT Terminal
EL3154 is a Beckhoff industrial component with Supply voltage 24 V DC (IEC 61131-2); Enclosure rating IP20 (IEC 60529); Operating temperature 0...+55 °C (IEC 60068-2-1). It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Supply voltage24 V DC (IEC 61131-2)
-
Enclosure ratingIP20 (IEC 60529)
-
Operating temperature0...+55 °C (IEC 60068-2-1)
-
Mounting35 mm DIN rail (IEC 60715)
Specifications
| Electrical |
| Tripping characteristic |
8…9 mm |
| Supply voltage |
24 V DC (IEC 61131-2) |
| Frequency |
5 kHz |
| I/O and communication |
| Bus interface |
typ. 130 mA |
| Communication ports |
EtherCAT, Ethernet |
| Resolution |
16 bit (incl. sign) |
| Mechanical |
| Dimensions (H x W x D) |
12 mm x 100 mm x 68 mm |
| Weight |
approx. 60 g |
| Mounting |
35 mm DIN rail (IEC 60715) |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
0...+55 °C (IEC 60068-2-1) |
| Storage temperature |
-40…+85°C |
| Certifications |
CE, UL, cULus |
| Humidity |
95%, no condensation |
Values follow the Beckhoff EtherCAT Terminal specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Beckhoff EtherCAT Terminal variants |
| Catalog number |
Mounting |
|
EL3154 (this page) |
35 mm DIN rail (IEC 60715) |
| EL3151 |
35 mm DIN rail (IEC 60715) |
| EL3152 |
35 mm DIN rail (IEC 60715) |
| EL3102 |
35 mm DIN rail (IEC 60715) |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The EL3154 is the device-level element in a Beckhoff industrial component installation. It receives the field signals and control supply listed above — 24 V DC (IEC 61131-2) — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides 35 mm DIN rail (IEC 60715) support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Beckhoff EL3154
Beckhoff EL3154 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number EL3154; always cross-check the catalog number and hardware revision on the nameplate before placing an order.
- Enclosure rating: IP20 (IEC 60529) — Confirm the revision of the installed unit before a like-for-like replacement.
- Operating temperature: 0...+55 °C (IEC 60068-2-1) — Use it as the reference when cross-checking a current-production equivalent.
- Mounting: 35 mm DIN rail (IEC 60715) — Verify it in the project documentation before confirming the order.
- Communication ports: EtherCAT, Ethernet — Check this value against the nameplate of the installed unit before ordering.
Available from stock with datasheet, certificates and a quotation on request.
Common questions about EL3154
Q.For EL3154, what does the specification table state about resolution?
The specification table lists resolution = 16 bit (incl. sign) for Beckhoff EL3154. Check the revision of the installed unit if the catalog number has been superseded.
Q.Which value is published under enclosure rating for catalog number EL3154?
For EL3154, enclosure rating is given as IP20 (IEC 60529). Compare it with the nameplate of the installed unit before ordering.
Q.Before ordering EL3154, which certifications entry should be checked?
The certifications entry quoted above is CE, UL, cULus. Confirm this figure against the unit currently in the panel.
Q.What should I include in an enquiry for EL3154?
Send the full catalog number EL3154, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Beckhoff EL3154.
Q.Can the EL3154 replace the unit currently installed in my panel?
Compare catalog number EL3154 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.