Couldn't load pickup availability
Got questions?
Feel free to get in touch
Ask an expert!
Beckhoff · EtherCAT Terminal
EL2008 is a Beckhoff circuit breaker with Tripping characteristic 8…9 mm; Rated operational voltage 24 V DC (-15%/+20%); Breaking capacity Icu/Ics typ. < 2 A. It is used in distribution boards, motor protection circuits, panel feeders where the installed unit is matched to the original catalog number and a compact, documented part is required.
| Electrical | |
| Rated operational voltage | 24 V DC (-15%/+20%) |
|---|---|
| Breaking capacity Icu/Ics | typ. < 2 A |
| Tripping characteristic | 8…9 mm |
| Supply voltage | 24 V DC (IEC 61131-2) |
| Output current | 0.5 A (short-circuit proof) per channel |
| I/O and communication | |
| Bus interface | typ. 110 mA |
| Communication ports | EtherCAT, Ethernet |
| Mechanical | |
| Dimensions (H x W x D) | 12 mm x 100 mm x 68 mm |
| Weight | approx. 55 g |
| Mounting | 35 mm DIN rail (IEC 60715) |
| Enclosure rating | IP20 (IEC 60529) |
| Environment and compliance | |
| Operating temperature | 0...+55 °C (IEC 60068-2-1) |
| Storage temperature | -40…+85°C |
| Certifications | CE, UL, cULus |
| Humidity | 95%, no condensation |
Values follow the Beckhoff EtherCAT Terminal specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
| Beckhoff EtherCAT Terminal variants | |||
| Catalog number | Breaking capacity Icu/Ics | Tripping characteristic | Rated operational voltage |
|---|---|---|---|
| EL2008 (this page) | typ. < 2 A | 8…9 mm | 24 V DC (-15%/+20%) |
| EL2008-0015 | — | — | — |
| EL2004 | typ. < 2 A | 8…9 mm | 24 V DC (-15%/+20%) |
| EL2024 | typ. < 70 A | 8…9 mm | 24 V DC (-15%/+20%) |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
The EL2008 is the device-level element in a Beckhoff circuit breaker installation. It receives the field signals and control supply listed above — 24 V DC (IEC 61131-2) — and switches or conditions the load within the 24 V DC (-15%/+20%) ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in distribution boards, motor protection circuits, panel feeders, where the unit is matched to the original catalog number and the enclosure provides 35 mm DIN rail (IEC 60715) support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Beckhoff EL2008 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number EL2008; verify the catalog number against your bill of materials before requesting a quotation.
Available from stock with datasheet, certificates and a quotation on request.
Q.Before ordering EL2008, which bus interface entry should be checked?
The bus interface entry quoted above is typ. 110 mA. Check the revision of the installed unit if the catalog number has been superseded.
Q.Where can I find the enclosure rating data for EL2008?
It is listed in the specification table for Beckhoff EL2008 as IP20 (IEC 60529). Compare it with the nameplate of the installed unit before ordering.
Q.For EL2008, what does the specification table state about rated operational voltage?
The specification table lists rated operational voltage = 24 V DC (-15%/+20%) for Beckhoff EL2008. Confirm this figure against the unit currently in the panel.
Q.What should I include in an enquiry for EL2008?
Send the full catalog number EL2008, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Beckhoff EL2008.
Q.How do I confirm compatibility of EL2008 before ordering?
Match the catalog number EL2008 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.
Standard (US & Canada, tracked courier): delivered in 5–8 business days. In-stock items are processed within 2–4 business days. USD 25 flat rate on orders under $500.00; free on orders of $500.00 and above.
Express (DHL Express / FedEx International): upgraded expedited delivery in 2–4 business days. The Express surcharge is calculated at checkout based on destination and order weight.
Non-Stock / On-Order items ship on request: dispatch time is confirmed before your order — see our Shipping Policy. Shipping charges and available services are displayed at checkout. See the Shipping Policy for details.
Every product is covered by a 12-month seller warranty provided by SHLY-PLC, effective from the date of delivery, against defects in materials and workmanship under normal use.
This warranty does not cover damage from misuse, improper installation, power surges, neglect, unauthorized repair, or normal wear and tear. See our Return Policy for warranty-claim instructions.
No reviews yet. Be the first to review this product!
