Balluff · industrial component
BOS02JN is a Balluff industrial component with Supply voltage 10...30 V DC; Enclosure rating IP67 (IEC 60529); Operating temperature -25...+70 °C. It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Supply voltage10...30 V DC
-
Enclosure ratingIP67 (IEC 60529)
-
Operating temperature-25...+70 °C
-
CertificationsCE, cULus
Specifications
| Electrical |
| Supply voltage |
10...30 V DC |
| I/O and communication |
| Response time |
<= 1000 Hz switching frequency |
| Mechanical |
| Enclosure rating |
IP67 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
-25...+70 °C |
| Certifications |
CE, cULus |
Values follow the Balluff industrial component specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Balluff industrial component variants |
| Catalog number |
Mounting |
|
BOS02JN (this page) |
— |
| BOS02JZ |
— |
| BOS02JL |
— |
| BOS02JU |
— |
All variants share the same industrial component footprint and terminal layout; the columns above show where they differ. Selecting a different catalog number changes the electrical interface, not the mounting.
Where it sits in the control system
The BOS02JN is the device-level element in a Balluff industrial component installation. It receives the field signals and control supply listed above — 10...30 V DC — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides standard panel or DIN-rail support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Before you specify
-
Ratings. Confirm the rated current and voltage match the circuit before specifying; sizing from the nameplate avoids field mismatch.
-
Mounting. Check the standard panel or DIN-rail fit against the existing enclosure before ordering.
-
Marking. Record the catalog number and revision from the nameplate of the installed unit for a like-for-like spare.
Technical FAQ
Q.What supply does this device require?
It requires 10...30 V DC. Size the supply source to the same rating shown in the Specifications table.
Q.What is the operating temperature range?
The confirmed operating range is -25...+70 °C. Panels running beyond it need derated sizing.
Q.What replaces a unit that is no longer in production?
For a like-for-like spare, record the catalog number and revision from the nameplate; a current-production equivalent is identified by matching function and ratings.