Balluff · BOS 21M-UUI-RP30-S4
BOS026R is a Balluff industrial component with Supply voltage 10 ... 30 VDC; Enclosure rating IP67 (IEC 60529); Operating temperature -5 ... +55 C. It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Supply voltage10 ... 30 VDC
-
Enclosure ratingIP67 (IEC 60529)
-
Operating temperature-5 ... +55 C
-
CertificationsCE, UKCA, cULus, WEEE
Specifications
| Electrical |
| Supply voltage |
10 ... 30 VDC |
| I/O and communication |
| Communication ports |
M12x1 male connector, 4-pin |
| Output type (PNP/NPN) |
IO-Link 1.1 + 2x PNP/NPN push-pull, NO/NC |
| Mechanical |
| Dimensions (H x W x D) |
15 x 51 x 42.5 mm |
| Enclosure rating |
IP67 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
-5 ... +55 C |
| Certifications |
CE, UKCA, cULus, WEEE |
Values follow the Balluff BOS 21M-UUI-RP30-S4 specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Where it sits in the control system
The BOS026R is the device-level element in a Balluff industrial component installation. It receives the field signals and control supply listed above — 10 ... 30 VDC — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides standard panel or DIN-rail support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Before you specify
-
Ratings. Confirm the rated current and voltage match the circuit before specifying; sizing from the nameplate avoids field mismatch.
-
Mounting. Check the standard panel or DIN-rail fit against the existing enclosure before ordering.
-
Marking. Record the catalog number and revision from the nameplate of the installed unit for a like-for-like spare.
Technical FAQ
Q.What supply does this device require?
It requires 10 ... 30 VDC. Size the supply source to the same rating shown in the Specifications table.
Q.What I/O or output configuration does it provide?
It provides IO-Link 1.1 + 2x PNP/NPN push-pull, NO/NC. Match this to the existing wiring before substituting.
Q.What is the operating temperature range?
The confirmed operating range is -5 ... +55 C. Panels running beyond it need derated sizing.
Q.What replaces a unit that is no longer in production?
For a like-for-like spare, record the catalog number and revision from the nameplate; a current-production equivalent is identified by matching function and ratings.