Balluff · Sensor connector / cable
BNI0007 is a Balluff industrial component with Enclosure rating IP67 when threaded in (IEC 60529); Operating temperature -5...+55 °C (IEC 60068-2-1); Mounting DIN rail / panel. It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Enclosure ratingIP67 when threaded in (IEC 60529)
-
Operating temperature-5...+55 °C
-
MountingDIN rail / panel
-
CertificationsCE, UKCA, cULus, WEEE
Specifications
| I/O and communication |
| Communication ports |
1 |
| Mechanical |
| Mounting |
DIN rail / panel |
| Enclosure rating |
IP67 when threaded in (IEC 60529) |
| Environment and compliance |
| Operating temperature |
-5...+55 °C |
| Housing material |
PA, Transparent |
| Supply voltage |
18...30.2 VDC |
| Certifications |
CE, UKCA, cULus, WEEE |
Values follow the Balluff Sensor connector / cable specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Where it sits in the control system
The BNI0007 is the device-level element in a Balluff industrial component installation. It receives the field signals and control supply listed above — the rated supply — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides DIN rail / panel support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Industrial BNI0007
Industrial BNI0007 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number BNI0007; size the surrounding wiring and upstream protection to these published ratings rather than to a generic assumption.
- Mounting: DIN rail / panel — Use it as the reference when cross-checking a current-production equivalent.
- Certifications: CE, cULus — Verify it in the project documentation before confirming the order.
- Communication ports: 1 — Check this value against the nameplate of the installed unit before ordering.
- Enclosure rating: IP67 when threaded in (IEC 60529) — Match it to the existing panel and upstream protection.
For a discontinued unit, match function and electrical ratings rather than the label alone.
Common questions about BNI0007
Q.For BNI0007, what does the specification table state about communication ports?
The specification table lists communication ports = 1 for Industrial BNI0007. Use the value as the reference when sourcing a current-production equivalent.
Q.Which value is published under mounting for catalog number BNI0007?
For BNI0007, mounting is given as DIN rail / panel. Check the revision of the installed unit if the catalog number has been superseded.
Q.Before ordering BNI0007, which enclosure rating entry should be checked?
The enclosure rating entry quoted above is IP67 when threaded in (IEC 60529). Compare it with the nameplate of the installed unit before ordering.
Q.How do I confirm compatibility of BNI0007 before ordering?
Match the catalog number BNI0007 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.
Q.Can the BNI0007 replace the unit currently installed in my panel?
Compare catalog number BNI0007 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.