Balluff · industrial component
BMF00L9 is a Balluff industrial component with Supply voltage 10...30 V DC; Enclosure rating IP67 (IEC 60529); Operating temperature -25...+80 °C. It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Supply voltage10...30 V DC
-
Enclosure ratingIP67 (IEC 60529)
-
Operating temperature-25...+80 °C
-
MountingDIN rail / panel
Specifications
| Electrical |
| Supply voltage |
10...30 V DC |
| Mechanical |
| Mounting |
DIN rail / panel |
| Enclosure rating |
IP67 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
-25...+80 °C |
| Housing material |
PA 12 |
| Material sensing surface |
PA 12 |
| Certifications |
CE, UKCA, cULus, WEEE |
Values follow the Balluff industrial component specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Balluff industrial component variants |
| Catalog number |
Mounting |
|
BMF00L9 (this page) |
DIN rail / panel |
| BMF00LK |
DIN rail / panel |
| BMF00L3 |
DIN rail / panel |
| BMF00L8 |
DIN rail / panel |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The BMF00L9 is the device-level element in a Balluff industrial component installation. It receives the field signals and control supply listed above — 10...30 V DC — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides DIN rail / panel support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Industrial 235K-H-NO-C-A2-S75-00
Industrial 235K-H-NO-C-A2-S75-00 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 235K-H-NO-C-A2-S75-00; always cross-check the catalog number and hardware revision on the nameplate before placing an order.
- Enclosure rating: IP67 (IEC 60529) — Verify it in the project documentation before confirming the order.
- Supply voltage: 10...30 V DC — Check this value against the nameplate of the installed unit before ordering.
- Operating temperature: -25...+80 °C — Match it to the existing panel and upstream protection.
- Mounting: DIN rail / panel — Record it with the other nameplate data when sourcing a replacement.
Datasheets and compliance documents are available on request; quote the full catalog number when enquiring.
Common questions about 235K-H-NO-C-A2-S75-00
Q.For 235K-H-NO-C-A2-S75-00, what does the specification table state about supply voltage?
The specification table lists supply voltage = 10...30 V DC for Industrial 235K-H-NO-C-A2-S75-00. Compare it with the nameplate of the installed unit before ordering.
Q.Which value is published under mounting for catalog number 235K-H-NO-C-A2-S75-00?
For 235K-H-NO-C-A2-S75-00, mounting is given as DIN rail / panel. Confirm this figure against the unit currently in the panel.
Q.Before ordering 235K-H-NO-C-A2-S75-00, which operating temperature entry should be checked?
The operating temperature entry quoted above is -25...+80 °C. Use the value as the reference when sourcing a current-production equivalent.
Q.Can the 235K-H-NO-C-A2-S75-00 replace the unit currently installed in my panel?
Compare catalog number 235K-H-NO-C-A2-S75-00 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.
Q.What should I include in an enquiry for 235K-H-NO-C-A2-S75-00?
Send the full catalog number 235K-H-NO-C-A2-S75-00, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Industrial 235K-H-NO-C-A2-S75-00.