Couldn't load pickup availability
Got questions?
Feel free to get in touch
Ask an expert!
Balluff · BES Q40KFU-PAC40E-S04G
BES021M is a Balluff industrial component with Enclosure rating IP67 (IEC 60529); Operating temperature -10...+70 °C (IEC 60068-2-1); Mounting 40x40 PBT square housing, non-flush, magnetic-field-resistant (factor 1), connector M12x1 male 4-pin. It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
| Electrical | |
| Supply voltage | 10...30 V DC |
|---|---|
| I/O and communication | |
| Sensing distance Sn | 40 mm |
| Response time | 100 Hz |
| Output type (PNP/NPN) | PNP normally open/normally |
| Mechanical | |
| Dimensions (H x W x D) | 40 x 40 x 62 mm |
| Mounting | 40x40 PBT square housing, non-flush, magnetic-field-resistant (factor 1), connector M12x1 male 4-pin |
| Connection | Connector, M12x1-Male, 4-pin |
| Housing material | PBT |
| Material sensing surface | PBT |
| Enclosure rating | IP67 (IEC 60529) |
| Environment and compliance | |
| Operating temperature | -10...+70 °C |
| Certifications | CE, UKCA, cULus, WEEE |
| Magnetic field immune | magnetic field immune (AC/DC) |
| Additional features | Factor 1 |
Values follow the Balluff BES Q40KFU-PAC40E-S04G specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
| Balluff BES Q40KFU-PAC40E-S04G variants | |||
| Catalog number | Mounting | ||
|---|---|---|---|
| BES021M (this page) | 40x40 PBT square housing, non-flush, magnetic-field-resistant (factor 1), connector M12x1 male 4-pin | ||
| BES0216 | 40x40 square housing, for flush mounting (factor 1), connector M12x1 male 4-pin | ||
| BES021H | 40x40 PBT square housing, non-flush, magnetic-field-resistant (factor 1), connector M12x1 male 4-pin | ||
| BES0221 | 40x40 PBT square housing, non-flush, magnetic-field-resistant (factor 1), connector M12x1 male 4-pin | ||
Verify model-specific dimensions, terminals and installation requirements in the manufacturer documentation before selecting an alternative.
The BES021M is the device-level element in a Balluff industrial component installation. It receives the field signals and control supply listed above — the rated supply — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides 40x40 PBT square housing, non-flush, magnetic-field-resistant (factor 1), connector M12x1 male 4-pin support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Balluff BES021M Inductive Proximity Sensor. See the manufacturer product information for this catalog number.
For a discontinued unit, match function and electrical ratings rather than the label alone.
Q.Where can I find the mounting data for Q40KFU-PAC40E-S04G?
It is listed in the specification table for Industrial Q40KFU-PAC40E-S04G as 40x40 PBT square housing, non-flush, magnetic-field-resistant (factor 1), connector M12x1 male 4-pin. Use the value as the reference when sourcing a current-production equivalent.
Q.For Q40KFU-PAC40E-S04G, what does the specification table state about output type (PNP/NPN)?
The specification table lists output type (PNP/NPN) = PNP, NO/NC for Industrial Q40KFU-PAC40E-S04G. Check the revision of the installed unit if the catalog number has been superseded.
Q.Which value is published under enclosure rating for catalog number Q40KFU-PAC40E-S04G?
For Q40KFU-PAC40E-S04G, enclosure rating is given as IP67 (IEC 60529). Compare it with the nameplate of the installed unit before ordering.
Q.What should I include in an enquiry for Q40KFU-PAC40E-S04G?
Send the full catalog number Q40KFU-PAC40E-S04G, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Industrial Q40KFU-PAC40E-S04G.
Q.How do I confirm compatibility of Q40KFU-PAC40E-S04G before ordering?
Match the catalog number Q40KFU-PAC40E-S04G and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.
Standard (US & Canada, tracked courier): delivered in 5–8 business days. In-stock items are processed within 2–4 business days. USD 25 flat rate on orders under $500.00; free on orders of $500.00 and above.
Express (DHL Express / FedEx International): upgraded expedited delivery in 2–4 business days. The Express surcharge is calculated at checkout based on destination and order weight.
Non-Stock / On-Order items ship on request: dispatch time is confirmed before your order — see our Shipping Policy. Shipping charges and available services are displayed at checkout. See the Shipping Policy for details.
Every product is covered by a 12-month seller warranty provided by SHLY-PLC, effective from the date of delivery, against defects in materials and workmanship under normal use.
This warranty does not cover damage from misuse, improper installation, power surges, neglect, unauthorized repair, or normal wear and tear. See our Return Policy for warranty-claim instructions.
No reviews yet. Be the first to review this product!
