Couldn't load pickup availability
Got questions?
Feel free to get in touch
Ask an expert!
Balluff · BES R01ZC-PAC70B-BP03
BES01W4 is a Balluff industrial component with Enclosure rating IP67 (IEC 60529); Operating temperature -25...+70 °C (IEC 60068-2-1); Mounting 32x20x8 zinc die-cast housing, for flush mounting, 3.00 m PUR cable. It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
| Electrical | |
| Supply voltage | 10...30 V DC |
|---|---|
| I/O and communication | |
| Sensing distance Sn | 7 mm |
| Response time | 150 Hz |
| Output type (PNP/NPN) | PNP normally open/normally closed (NO/NC) |
| Mechanical | |
| Dimensions (H x W x D) | 32 x 20 x 8 mm |
| Mounting | 32x20x8 zinc die-cast housing, for flush mounting, 3.00 m PUR cable |
| Connection | Cable, 3.00 m, PUR |
| Housing material | Zinc, Die casting |
| Material sensing surface | PA 12 |
| Enclosure rating | IP67 (IEC 60529) |
| Environment and compliance | |
| Operating temperature | -25...+70 °C |
| Certifications | CE, UKCA, cULus, WEEE |
Values follow the Balluff BES R01ZC-PAC70B-BP03 specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
| Balluff BES R01ZC-PAC70B-BP03 variants | |||
| Catalog number | Mounting | ||
|---|---|---|---|
| BES01W4 (this page) | 32x20x8 zinc die-cast housing, for flush mounting, 3.00 m PUR cable | ||
| BES0161 | M12x1 housing, flush mounting | ||
| BES0180 | 8x8 square compact housing, flush mounting | ||
| BES018C | 8x8 square compact housing, flush mounting | ||
Verify model-specific dimensions, terminals and installation requirements in the manufacturer documentation before selecting an alternative.
The BES01W4 is the device-level element in a Balluff industrial component installation. It receives the field signals and control supply listed above — the rated supply — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides 32x20x8 zinc die-cast housing, for flush mounting, 3.00 m PUR cable support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Balluff BES01W4 Inductive Proximity Sensor. See the manufacturer product information for this catalog number.
For a discontinued unit, match function and electrical ratings rather than the label alone.
Q.Before ordering R01ZC-PAC70B-BP03, which certifications entry should be checked?
The certifications entry quoted above is CE, UKCA, cULus, WEEE. Use the value as the reference when sourcing a current-production equivalent.
Q.Where can I find the dimensions (H x W x D) data for R01ZC-PAC70B-BP03?
It is listed in the specification table for Industrial R01ZC-PAC70B-BP03 as 32 x 20 x 8 mm. Check the revision of the installed unit if the catalog number has been superseded.
Q.For R01ZC-PAC70B-BP03, what does the specification table state about operating temperature?
The specification table lists operating temperature = -25...+70 °C (IEC 60068-2-1) for Industrial R01ZC-PAC70B-BP03. Compare it with the nameplate of the installed unit before ordering.
Q.What should I include in an enquiry for R01ZC-PAC70B-BP03?
Send the full catalog number R01ZC-PAC70B-BP03, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Industrial R01ZC-PAC70B-BP03.
Q.How do I confirm compatibility of R01ZC-PAC70B-BP03 before ordering?
Match the catalog number R01ZC-PAC70B-BP03 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.
Standard (US & Canada, tracked courier): delivered in 5–8 business days. In-stock items are processed within 2–4 business days. USD 25 flat rate on orders under $500.00; free on orders of $500.00 and above.
Express (DHL Express / FedEx International): upgraded expedited delivery in 2–4 business days. The Express surcharge is calculated at checkout based on destination and order weight.
Non-Stock / On-Order items ship on request: dispatch time is confirmed before your order — see our Shipping Policy. Shipping charges and available services are displayed at checkout. See the Shipping Policy for details.
Every product is covered by a 12-month seller warranty provided by SHLY-PLC, effective from the date of delivery, against defects in materials and workmanship under normal use.
This warranty does not cover damage from misuse, improper installation, power surges, neglect, unauthorized repair, or normal wear and tear. See our Return Policy for warranty-claim instructions.
No reviews yet. Be the first to review this product!
