Couldn't load pickup availability
Got questions?
Feel free to get in touch
Ask an expert!
B&R · B&R X20 I/O module
X20PS9400 is a B&R circuit breaker with Breaking capacity Icu/Ics Short-circuit proof, temporary overload; Supply voltage 24 VDC supply module for bus controller, X2X Link power supply and I/O; Enclosure rating IP20 (IEC 60529). It is used in distribution boards, motor protection circuits, panel feeders where the installed unit is matched to the original catalog number and a compact, documented part is required.
| Electrical | |
| Breaking capacity Icu/Ics | Short-circuit proof, temporary overload |
|---|---|
| Supply voltage | 24 VDC supply module for bus controller, X2X Link power supply and I/O |
| Input voltage range | 85...264 V AC / 110...300 V DC (IEC 61010) |
| Efficiency | up to 94 % |
| Overload capacity | Yes, using LED status indicator and software |
| I/O and communication | |
| Communication ports | POWERLINK, Ethernet |
| Mechanical | |
| Mounting | 35 mm DIN rail (IEC 60715) |
| Enclosure rating | IP20 (IEC 60529) |
| Environment and compliance | |
| Operating temperature | -25...+70 °C (IEC 60068-2-1) |
| Certifications | CE, UL, cULus |
Values follow the B&R B&R X20 I/O module specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
| B&R B&R X20 I/O module variants | |||
| Catalog number | Breaking capacity Icu/Ics | ||
|---|---|---|---|
| X20PS9400 (this page) | Short-circuit proof, temporary overload | ||
| X20PS9400BR | Short-circuit proof, temporary overload | ||
| X20PS9402 | Short-circuit proof, temporary overload | ||
| X20PS9500 | Short-circuit proof, temporary overload | ||
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
The X20PS9400 is the device-level element in a B&R circuit breaker installation. It receives the field signals and control supply listed above — 24 VDC supply module for bus controller, X2X Link power supply and I/O — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in distribution boards, motor protection circuits, panel feeders, where the unit is matched to the original catalog number and the enclosure provides 35 mm DIN rail (IEC 60715) support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Industrial X20PS9400 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number X20PS9400; record the nameplate data of the unit being replaced before selecting an equivalent.
Available from stock with datasheet, certificates and a quotation on request.
Q.For X20PS9400, what does the specification table state about enclosure rating?
The specification table lists enclosure rating = IP20 (IEC 60529) for Industrial X20PS9400. Compare it with the nameplate of the installed unit before ordering.
Q.Which value is published under efficiency for catalog number X20PS9400?
For X20PS9400, efficiency is given as up to 94 %. Confirm this figure against the unit currently in the panel.
Q.Before ordering X20PS9400, which mounting entry should be checked?
The mounting entry quoted above is 35 mm DIN rail (IEC 60715). Use the value as the reference when sourcing a current-production equivalent.
Q.What should I include in an enquiry for X20PS9400?
Send the full catalog number X20PS9400, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Industrial X20PS9400.
Q.How do I confirm compatibility of X20PS9400 before ordering?
Match the catalog number X20PS9400 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.
Standard (US & Canada, tracked courier): delivered in 5–8 business days. In-stock items are processed within 2–4 business days. USD 25 flat rate on orders under $500.00; free on orders of $500.00 and above.
Express (DHL Express / FedEx International): upgraded expedited delivery in 2–4 business days. The Express surcharge is calculated at checkout based on destination and order weight.
Non-Stock / On-Order items ship on request: dispatch time is confirmed before your order — see our Shipping Policy. Shipping charges and available services are displayed at checkout. See the Shipping Policy for details.
Every product is covered by a 12-month seller warranty provided by SHLY-PLC, effective from the date of delivery, against defects in materials and workmanship under normal use.
This warranty does not cover damage from misuse, improper installation, power surges, neglect, unauthorized repair, or normal wear and tear. See our Return Policy for warranty-claim instructions.
No reviews yet. Be the first to review this product!
