Couldn't load pickup availability
All industrial automation equipment comes complete with standard matching accessories and detailed step-by-step commissioning manuals. Unbox, install and commission your automation projects smoothly with full confidence.
Got questions?
Feel free to get in touch
Ask an expert!
The B&R 80VD100PD-C022-01 is an industrial automation component. The listed technical data shows rated IP20, based on the manufacturer's datasheet. It is supplied by SHLY-PLC, an independent industrial-automation distributor: every unit is visually inspected and functionally checked before dispatch, held in ready stock and shipped worldwide for maintenance, spares and retrofit use. Share your application or existing part number and our team will confirm fitment and comparable in-stock alternatives.
Technical parameters compiled from the manufacturer data sheet and reference documentation.
| Technical Specifications | |
| Other | |
| Inverter module | Connection for 2 servo motors with resolver |
| Module run/error | Yes, using LED status indicator and software |
| Module temperature / Cooling unit temperature | Yes, using software |
| POWERLINK | Yes, using LED status indicator |
| CPU - 24 VDC power supply | No |
| CPU - Power supply | Yes |
| CE | Yes |
| B&R ID code | 0xAB6D |
| Status indicators | POWERLINK, operating state, module status, motor information |
| Input voltage | 24 VDC ±25% |
| Voltage monitoring | Yes |
| Idle (no motor powered) | 0.5 W |
| Continuous power consumption | 1.31 kW |
| Switching frequency 5 kHz | [0.24×I M1 ² + 0.216×I M1 + 0.4] W + [0.24×I M2 ² + 0.216×I M2 + 0.4] W |
| Switching frequency 10 kHz | [0.24×I M1 ² + 0.215×I M1 + 0.8] W + [0.24×I M2 ² + 0.215×I M2 + 0.8] W |
| Switching frequency 20 kHz | [0.24×I M1 ² + 0.214×I M1 + 1.6] W + [0.24×I M2 ² + 0.214×I M2 + 1.6] W |
| Switching frequency 40 kHz | [0.24×I M1 ² + 0.213×I M1 +3.2] W + [0.24×I M2 ² + 0.213×I M2 +3.2] W |
| Input voltage | 24 to 64 VDC ±25% |
| Inrush current | Max. 10 A |
| Undervoltage cutoff | <18 VDC |
| Overvoltage cutoff | >95 VDC |
| Voltage measurement | Yes |
| Line protection | Must occur externally |
| Quantity | 2 |
| Nominal current | Up to 20 kHz: 8 A RMS / 11.3 A Peak At 40 kHz and greater than 45°C: 6.5 A RMS / 9.2 A Peak |
| Max. current/motor | 10.6 A RMS / 15 A Peak |
| Max. current/module | 30 A Peak |
| Nominal switching frequency | 5 kHz |
| Possible switching frequencies | 5 / 10 / 20 / 40 kHz |
| Max. motor line length | 25 m |
| Max. output frequency | 598 Hz |
| Controller frequency | 20 kHz |
| Axis 1 | Yes |
| Axis 2 | No |
| Resistive load | 100 Hz |
| Inductive load | See section "Switching inductive loads" |
| Overload and short-circuit protection | Yes |
| Quantity | 1 |
| Nominal voltage | 24 VDC |
| Continuous current per connection | 1 A |
| Response threshold for open-circuit monitoring | <100 mA |
| Variant | Female RJ45 connector |
| Electrical isolation | Yes |
| Output voltage | 3.4 V eff |
| Output current | Max. 50 mA eff |
| Signal transmission | Differential signal |
| BRX | 0.5 (±10%) |
| BRT | 0.5 (±10%) with limitations |
| Angular position resolution | 14 bits/rev |
| Low | <5 VDC |
| High | >15 VDC |
| Maximum | 500 ms (Rev. < G0: 551 ms) |
| Maximum | 500 ms |
| Input circuit | Sink |
| Insulation voltage between input and bus | 500 V eff |
| Maximum | 30 VDC |
| Rising edge | [Instant recording] Typ. 52 µs |
| Falling edge | [Instant recording] Typ. 53 µs |
| Input - ACOPOS | Yes, 500 V eff |
| Additional functions | Can be used as trigger input |
| Modulation compared to ground potential | Max. ±38 V |
| Horizontal | No |
| Vertical | Yes |
| Pollution degree per EN 61800-5-1 | 2 (non-conductive pollution) |
| Degree of protection per EN 60529 | IP20 |
| Operation | 0 to 45°C |
| Storage | -25 to 55°C |
| Operation | 5 to 85%, non-condensing |
| Storage | 5 to 95%, non-condensing |
| Width | 65 mm |
| Height | 134 mm |
| Depth | 95 mm |
| Note | Order terminal blocks and cables separately! |
| Mounting/Cooling | Screw mounting with heat spreader on mounting plate or cold-plate. |
| Weight | 750 g |
| Backplane | Always mount on conductive and earthed backplane. |
Model variants, options and firmware revisions can affect fitment. Before ordering the B&R 80VD100PD-C022-01 industrial automation component, share your existing part number or project requirements and our team will cross-reference comparable in-stock B&R units and verify compatibility. This listing is provided by an independent industrial-automation distributor; brand names and part numbers are used for identification only.
A: Each 80VD100PD-C022-01 is inspected and functionally checked before sale. Contact us for the current stock condition and quantity.
A: In-stock orders placed before 14:00 ship the same business day. Standard worldwide delivery is about 5-8 business days, express shipping is available and orders over $500 ship free.
A: Yes. Share your existing part number or application and our technical team will verify compatibility and provide cross-references to comparable in-stock models.
80VD100PD-C022-01 · Technical reference data · Independently supplied by SHLY-PLC
Place your order before 14:00 for earliest possible shipment handover. With round-the-clock transit operated by our partnered global logistics providers, parcels reach most international destinations following routine customs processing. Economy shipping takes 5–8 business days, while express delivery arrives in 5–8 business days, both subject to customs clearance progress.Shipping fees will be charged for all orders under USD 500, and the exact shipping cost will be determined and collected by our logistics carriers. Shipments to remote international regions will incur additional courier surcharges to offset extra cross-border transportation costs.
Factory warranty service is not applicable to this industrial control equipment, and extended warranty packages are not provided for this item.
No reviews yet. Be the first to review this product!
