Allen-Bradley · Compact 5000 I/O
5069-L4UPSRTB is an Allen-Bradley terminal block with Rated current Ie up to 41 A (IEC 60947-7-1); Rated operational voltage 800 V (IEC 60947-7-1); Enclosure rating IP20 (IEC 60529). It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Rated current Ieup to 41 A (IEC 60947-7-1)
-
Rated operational voltage800 V (IEC 60947-7-1)
-
Enclosure ratingIP20 (IEC 60529)
-
Operating temperature0...+55 °C (IEC 60068-2-1)
Specifications
| Electrical |
| Rated current Ie |
up to 41 A (IEC 60947-7-1) |
| Rated operational voltage |
800 V (IEC 60947-7-1) |
| Mechanical |
| Mounting |
DIN rail / panel |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
0...+55 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Values follow the Allen-Bradley Compact 5000 I/O specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Allen-Bradley Compact 5000 I/O variants |
| Catalog number |
Mounting |
|
5069-L4UPSRTB (this page) |
DIN rail / panel |
| 5069-L4100ERMW |
35 mm DIN rail (IEC 60715) |
| 5069-L4200ERMW |
35 mm DIN rail (IEC 60715) |
| 5069-L430ERMW |
35 mm DIN rail (IEC 60715) |
Verify model-specific dimensions, terminals and installation requirements in the manufacturer documentation before selecting an alternative.
Where it sits in the control system
The 5069-L4UPSRTB is the device-level element in an Allen-Bradley terminal block installation. It receives the field signals and control supply listed above — 800 V (IEC 60947-7-1) — and switches or conditions the load within the up to 41 A (IEC 60947-7-1) ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides DIN rail / panel support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Allen-Bradley 5069-L4UPSRTB
Allen-Bradley 5069-L4UPSRTB UPS Terminal Block. See the manufacturer product information for this catalog number.
- Enclosure rating: IP20 (IEC 60529) — Match it to the existing panel and upstream protection.
- Rated operational voltage: 800 V (IEC 60947-7-1) — Record it with the other nameplate data when sourcing a replacement.
- Rated current Ie: up to 41 A (IEC 60947-7-1) — Confirm the revision of the installed unit before a like-for-like replacement.
- Mounting: DIN rail / panel — Use it as the reference when cross-checking a current-production equivalent.
Available from stock with datasheet, certificates and a quotation on request.
Common questions about 5069-L4UPSRTB
Q.For 5069-L4UPSRTB, what does the specification table state about enclosure rating?
The specification table lists enclosure rating = IP20 (IEC 60529) for Allen-Bradley 5069-L4UPSRTB. Confirm this figure against the unit currently in the panel.
Q.Which value is published under rated operational voltage for catalog number 5069-L4UPSRTB?
For 5069-L4UPSRTB, rated operational voltage is given as 800 V (IEC 60947-7-1). Use the value as the reference when sourcing a current-production equivalent.
Q.Before ordering 5069-L4UPSRTB, which operating temperature entry should be checked?
The operating temperature entry quoted above is 0...+55 °C (IEC 60068-2-1). Check the revision of the installed unit if the catalog number has been superseded.
Q.What should I include in an enquiry for 5069-L4UPSRTB?
Send the full catalog number 5069-L4UPSRTB, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Allen-Bradley 5069-L4UPSRTB.
Q.Can the 5069-L4UPSRTB replace the unit currently installed in my panel?
Compare catalog number 5069-L4UPSRTB and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.