Allen-Bradley 2711P-T7C22D9P PanelView Plus 7 Graphic Terminal

SKU: 2711P-T7C22D9P
Regular price $1,019.92
In stock (68 units)
Free standard shipping on orders of $500 and above
100% secure payments
Industry leading quality

Allen-Bradley · PanelView HMI

2711P-T7C22D9P is an Allen-Bradley HMI panel with Supply voltage 24 V DC (IEC 60950-1); Enclosure rating IP65 (IEC 60529); Communication ports RS-232/422/485, Ethernet. It is used in machine operator panels, control cabinets, local HMI stations where the installed unit is matched to the original catalog number and a compact, documented part is required.

  • Supply voltage24 V DC (IEC 60950-1)
  • Enclosure ratingIP65 (IEC 60529)
  • MountingPanel / DIN rail

Specifications

Electrical
Supply voltage 24 V DC (IEC 60950-1)
Mechanical
Mounting Panel / DIN rail
Enclosure rating IP65 (IEC 60529)
Touch type resistive or projective capacitive
Environment and compliance
Operating temperature 0...+50 °C
Certifications CE, UL, cULus

Values follow the Allen-Bradley PanelView HMI specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.

Model comparison in the same family

Allen-Bradley PanelView HMI variants
Catalog number Supply voltage
2711P-T7C22D9P (this page) 24 V DC (IEC 60950-1)
2711P-T10C21D8S 24 V DC (IEC 60950-1)
2711P-T10C22D8S 24 V DC (IEC 60950-1)
2711P-T10C22D9P 24 V DC (IEC 60950-1)

Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.

Where it sits in the control system

The 2711P-T7C22D9P is the device-level element in an Allen-Bradley HMI panel installation. It receives the field signals and control supply listed above — 24 V DC (IEC 60950-1) — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.

Typical installations place it in machine operator panels, control cabinets, local HMI stations, where the unit is matched to the original catalog number and the enclosure provides Panel / DIN rail support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.

Selection notes for Allen-Bradley 2711P-T7C22D9P

Allen-Bradley 2711P-T7C22D9P — Operator panel for visualisation, parameter setting and alarm handling on a control cabinet door or console. The figures below are taken from the specification table on this page for catalog number 2711P-T7C22D9P; verify the catalog number against your bill of materials before requesting a quotation.

  • Certifications: CE, UL, cULus — Confirm the revision of the installed unit before a like-for-like replacement.
  • Supply voltage: 24 V DC (IEC 60950-1) — Use it as the reference when cross-checking a current-production equivalent.
  • Operating temperature: 0...+50 °C — Verify it in the project documentation before confirming the order.
  • Enclosure rating: IP65 (IEC 60529) — Check this value against the nameplate of the installed unit before ordering.

Available from stock with datasheet, certificates and a quotation on request.

Common questions about 2711P-T7C22D9P

Q.For 2711P-T7C22D9P, what does the specification table state about mounting?

The specification table lists mounting = Panel / DIN rail for Allen-Bradley 2711P-T7C22D9P. Check the revision of the installed unit if the catalog number has been superseded.

Q.Which value is published under certifications for catalog number 2711P-T7C22D9P?

For 2711P-T7C22D9P, certifications is given as CE, UL, cULus. Compare it with the nameplate of the installed unit before ordering.

Q.Before ordering 2711P-T7C22D9P, which operating temperature entry should be checked?

The operating temperature entry quoted above is 0...+50 °C. Confirm this figure against the unit currently in the panel.

Q.What should I include in an enquiry for 2711P-T7C22D9P?

Send the full catalog number 2711P-T7C22D9P, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Allen-Bradley 2711P-T7C22D9P.

Q.Can the 2711P-T7C22D9P replace the unit currently installed in my panel?

Compare catalog number 2711P-T7C22D9P and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.

Standard (US & Canada, tracked courier): delivered in 5–8 business days. In-stock items are processed within 2–4 business days. USD 25 flat rate on orders under $500.00; free on orders of $500.00 and above.

Express (DHL Express / FedEx International): upgraded expedited delivery in 2–4 business days. The Express surcharge is calculated at checkout based on destination and order weight.

Non-Stock / On-Order items ship on request: dispatch time is confirmed before your order — see our Shipping Policy. Shipping charges and available services are displayed at checkout. See the Shipping Policy for details.

Every product is covered by a 12-month seller warranty provided by SHLY-PLC, effective from the date of delivery, against defects in materials and workmanship under normal use.

This warranty does not cover damage from misuse, improper installation, power surges, neglect, unauthorized repair, or normal wear and tear. See our Return Policy for warranty-claim instructions.

★★★★★

No reviews yet. Be the first to review this product!