Allen-Bradley · PowerFlex 4 drive
22C-D310A103 is an Allen-Bradley variable-frequency drive with Rated operational voltage 3-phase 400 V AC; Overload capacity 150% for 60 s; Enclosure rating IP20 (IEC 60529). It is used in pump sets, conveyor belts, fan and compressor drives where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Rated operational voltage3-phase 400 V AC
-
Overload capacity150% for 60 s
-
Enclosure ratingIP20 (IEC 60529)
-
Frequency50/60 Hz
Specifications
| Electrical |
| Rated operational voltage |
3-phase 400 V AC |
| Supply voltage |
1-phase 200...240 V / 3-phase 380...480 V AC |
| Frequency |
50/60 Hz |
| Control method |
V/f, sensorless vector (IEC 61800-2) |
| Overload capacity |
150% for 60 s |
| I/O and communication |
| Communication ports |
EtherNet/IP, DeviceNet |
| Mechanical |
| Mounting |
Cabinet / DIN rail |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
0...+40 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Values follow the Allen-Bradley PowerFlex 4 drive specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Allen-Bradley PowerFlex 4 drive variants |
| Catalog number |
Rated operational voltage |
Overload capacity |
Frequency |
|
22C-D310A103 (this page) |
3-phase 400 V AC |
150% for 60 s |
50/60 Hz |
| 22C-D370A103 |
3-phase 400 V AC |
150% for 60 s |
50/60 Hz |
| 22C-D010N103 |
1-phase 200-240 V / 3-phase 380-480 V |
150% for 60 s |
50/60 Hz |
| 22C-D012N103 |
1-phase 200-240 V / 3-phase 380-480 V |
150% for 60 s |
50/60 Hz |
All variants share the same PowerFlex 4 drive footprint and terminal layout; the columns above show where they differ. Selecting a different catalog number changes the electrical interface, not the mounting.
Where it sits in the control system
The 22C-D310A103 is the device-level element in an Allen-Bradley variable-frequency drive installation. It receives the field signals and control supply listed above — 1-phase 200...240 V / 3-phase 380...480 V AC — and switches or conditions the load within the 3-phase 400 V AC ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in pump sets, conveyor belts, fan and compressor drives, where the unit is matched to the original catalog number and the enclosure provides Cabinet / DIN rail support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Allen-Bradley 22C-D310A103
Allen-Bradley 22C-D310A103 — Variable frequency drive for motor speed and torque control in pumps, fans, conveyors and general industrial machinery. The figures below are taken from the specification table on this page for catalog number 22C-D310A103; record the nameplate data of the unit being replaced before selecting an equivalent.
- Enclosure rating: IP20 (IEC 60529) — Use it as the reference when cross-checking a current-production equivalent.
- Communication ports: EtherNet/IP, DeviceNet — Verify it in the project documentation before confirming the order.
- Rated operational voltage: 3-phase 400 V AC — Check this value against the nameplate of the installed unit before ordering.
- Supply voltage: 1-phase 200...240 V / 3-phase 380...480 V AC — Match it to the existing panel and upstream protection.
For a discontinued unit, match function and electrical ratings rather than the label alone.
Common questions about 22C-D310A103
Q.Where can I find the rated operational voltage data for 22C-D310A103?
It is listed in the specification table for Allen-Bradley 22C-D310A103 as 3-phase 400 V AC. Use the value as the reference when sourcing a current-production equivalent.
Q.For 22C-D310A103, what does the specification table state about frequency?
The specification table lists frequency = 50/60 Hz for Allen-Bradley 22C-D310A103. Check the revision of the installed unit if the catalog number has been superseded.
Q.Which value is published under control method for catalog number 22C-D310A103?
For 22C-D310A103, control method is given as V/f, sensorless vector (IEC 61800-2). Compare it with the nameplate of the installed unit before ordering.
Q.What should I include in an enquiry for 22C-D310A103?
Send the full catalog number 22C-D310A103, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Allen-Bradley 22C-D310A103.
Q.Can the 22C-D310A103 replace the unit currently installed in my panel?
Compare catalog number 22C-D310A103 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.