Couldn't load pickup availability
Got questions?
Feel free to get in touch
Ask an expert!
Allen-Bradley · PowerFlex 4 drive
22C-D208A103 is an Allen-Bradley variable-frequency drive with Rated operational voltage 3-phase 400 V AC; Overload capacity 150% for 60 s; Enclosure rating IP20 (IEC 60529). It is used in pump sets, conveyor belts, fan and compressor drives where the installed unit is matched to the original catalog number and a compact, documented part is required.
| Electrical | |
| Rated operational voltage | 3-phase 400 V AC |
|---|---|
| Supply voltage | 1-phase 200...240 V / 3-phase 380...480 V AC |
| Input voltage range | 480V AC |
| Frequency | 50/60 Hz |
| Control method | V/f, sensorless vector (IEC 61800-2) |
| Overload capacity | 150% for 60 s |
| I/O and communication | |
| Communication ports | EtherNet/IP, DeviceNet |
| Mechanical | |
| Mounting | Cabinet / DIN rail |
| Enclosure rating | IP20 (IEC 60529) |
| Environment and compliance | |
| Operating temperature | 0...+40 °C (IEC 60068-2-1) |
| Certifications | CE, UL, cULus |
Values follow the Allen-Bradley PowerFlex 4 drive specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
| Allen-Bradley PowerFlex 4 drive variants | |||
| Catalog number | Overload capacity | Rated operational voltage | Frequency |
|---|---|---|---|
| 22C-D208A103 (this page) | 150% for 60 s | 3-phase 400 V AC | 50/60 Hz |
| 22C-D010N103 | 150% for 60 s | 1-phase 200-240 V / 3-phase 380-480 V | 50/60 Hz |
| 22C-D012N103 | 150% for 60 s | 1-phase 200-240 V / 3-phase 380-480 V | 50/60 Hz |
| 22C-D022N103 | 150 % for 60 s (IEC 61800-2) | 3-phase 400 V AC | 50/60 Hz (IEC 61800-2) |
All variants share the same PowerFlex 4 drive footprint and terminal layout; the columns above show where they differ. Selecting a different catalog number changes the electrical interface, not the mounting.
The 22C-D208A103 is the device-level element in an Allen-Bradley variable-frequency drive installation. It receives the field signals and control supply listed above — 1-phase 200...240 V / 3-phase 380...480 V AC — and switches or conditions the load within the 3-phase 400 V AC ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in pump sets, conveyor belts, fan and compressor drives, where the unit is matched to the original catalog number and the enclosure provides Cabinet / DIN rail support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Allen-Bradley 22C-D208A103 — Variable frequency drive for motor speed and torque control in pumps, fans, conveyors and general industrial machinery. The figures below are taken from the specification table on this page for catalog number 22C-D208A103; verify the catalog number against your bill of materials before requesting a quotation.
Datasheets and compliance documents are available on request; quote the full catalog number when enquiring.
Q.Which value is published under enclosure rating for catalog number 22C-D208A103?
For 22C-D208A103, enclosure rating is given as IP20 (IEC 60529). Check the revision of the installed unit if the catalog number has been superseded.
Q.Before ordering 22C-D208A103, which rated operational voltage entry should be checked?
The rated operational voltage entry quoted above is 3-phase 400 V AC. Compare it with the nameplate of the installed unit before ordering.
Q.Where can I find the supply voltage data for 22C-D208A103?
It is listed in the specification table for Allen-Bradley 22C-D208A103 as 1-phase 200...240 V / 3-phase 380...480 V AC. Confirm this figure against the unit currently in the panel.
Q.How do I confirm compatibility of 22C-D208A103 before ordering?
Match the catalog number 22C-D208A103 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.
Q.What should I include in an enquiry for 22C-D208A103?
Send the full catalog number 22C-D208A103, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Allen-Bradley 22C-D208A103.
Standard (US & Canada, tracked courier): delivered in 5–8 business days. In-stock items are processed within 2–4 business days. USD 25 flat rate on orders under $500.00; free on orders of $500.00 and above.
Express (DHL Express / FedEx International): upgraded expedited delivery in 2–4 business days. The Express surcharge is calculated at checkout based on destination and order weight.
Non-Stock / On-Order items ship on request: dispatch time is confirmed before your order — see our Shipping Policy. Shipping charges and available services are displayed at checkout. See the Shipping Policy for details.
Every product is covered by a 12-month seller warranty provided by SHLY-PLC, effective from the date of delivery, against defects in materials and workmanship under normal use.
This warranty does not cover damage from misuse, improper installation, power surges, neglect, unauthorized repair, or normal wear and tear. See our Return Policy for warranty-claim instructions.
No reviews yet. Be the first to review this product!
