Allen-Bradley · Micro800 controller
2080-SERIALISOLK is an Allen-Bradley industrial component with Supply voltage 24 V DC (IEC 61131-2); Enclosure rating IP20 (IEC 60529); Operating temperature 0...+55 °C (IEC 60068-2-1). It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Supply voltage24 V DC (IEC 61131-2)
-
Enclosure ratingIP20 (IEC 60529)
-
Operating temperature0...+55 °C (IEC 60068-2-1)
-
MountingDIN rail / panel
Specifications
| Electrical |
| Supply voltage |
24 V DC (IEC 61131-2) |
| I/O and communication |
| Communication ports |
RS-232/RS-485 isolated serial (plug-in module) |
| Mechanical |
| Mounting |
DIN rail / panel |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
0...+55 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Values follow the Allen-Bradley Micro800 controller specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Allen-Bradley Micro800 controller variants |
| Catalog number |
Mounting |
|
2080-SERIALISOLK (this page) |
DIN rail / panel |
| 2080-SERIALISOL |
DIN rail / panel |
| 2080-SD-2GB |
DIN rail / panel |
| 2080-DNET20 |
DIN rail / panel |
Verify model-specific dimensions, terminals and installation requirements in the manufacturer documentation before selecting an alternative.
Where it sits in the control system
The 2080-SERIALISOLK is the device-level element in an Allen-Bradley industrial component installation. It receives the field signals and control supply listed above — 24 V DC (IEC 61131-2) — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides DIN rail / panel support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Allen-Bradley 2080-SERIALISOLK
Allen-Bradley 2080-SERIALISOLK Industrial Communication Module. See the manufacturer product information for this catalog number.
- Communication ports: RS-232/RS-485 isolated serial (plug-in module) — Check this value against the nameplate of the installed unit before ordering.
- Enclosure rating: IP20 (IEC 60529) — Match it to the existing panel and upstream protection.
- Operating temperature: 0...+55 °C (IEC 60068-2-1) — Record it with the other nameplate data when sourcing a replacement.
- Mounting: DIN rail / panel — Confirm the revision of the installed unit before a like-for-like replacement.
Cross-check the ratings above with the installed device before confirming the order.
Common questions about 2080-SERIALISOLK
Q.Which value is published under operating temperature for catalog number 2080-SERIALISOLK?
For 2080-SERIALISOLK, operating temperature is given as 0...+55 °C (IEC 60068-2-1). Confirm this figure against the unit currently in the panel.
Q.Before ordering 2080-SERIALISOLK, which certifications entry should be checked?
The certifications entry quoted above is CE, UL, cULus. Use the value as the reference when sourcing a current-production equivalent.
Q.Where can I find the communication ports data for 2080-SERIALISOLK?
It is listed in the specification table for Allen-Bradley 2080-SERIALISOLK as RS-232/RS-485 isolated serial (plug-in module). Check the revision of the installed unit if the catalog number has been superseded.
Q.Can the 2080-SERIALISOLK replace the unit currently installed in my panel?
Compare catalog number 2080-SERIALISOLK and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.
Q.How do I confirm compatibility of 2080-SERIALISOLK before ordering?
Match the catalog number 2080-SERIALISOLK and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.