Allen-Bradley · CompactLogix PLC
1769-SM2 is an Allen-Bradley industrial component with Supply voltage 24 V DC (IEC 61131-2); Enclosure rating IP20 (IEC 60529); Operating temperature 0...+55 °C (IEC 60068-2-1). It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Supply voltage24 V DC (IEC 61131-2)
-
Enclosure ratingIP20 (IEC 60529)
-
Operating temperature0...+55 °C (IEC 60068-2-1)
-
MountingDIN rail / panel
Specifications
| Electrical |
| Supply voltage |
24 V DC (IEC 61131-2) |
| Mechanical |
| Mounting |
DIN rail / panel |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
0...+55 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Values follow the Allen-Bradley CompactLogix PLC specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Allen-Bradley CompactLogix PLC variants |
| Catalog number |
Mounting |
|
1769-SM2 (this page) |
DIN rail / panel |
| 1769-SM1 |
DIN rail / panel |
| 1769-SDDR |
DIN rail / panel |
| 1769-SDN |
DIN rail / panel |
Verify model-specific dimensions, terminals and installation requirements in the manufacturer documentation before selecting an alternative.
Where it sits in the control system
The 1769-SM2 is the device-level element in an Allen-Bradley industrial component installation. It receives the field signals and control supply listed above — 24 V DC (IEC 61131-2) — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides DIN rail / panel support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Allen-Bradley 1769-SM2
Allen-Bradley 1769-SM2 DSI Communication Module. See the manufacturer product information for this catalog number.
- Supply voltage: 24 V DC (IEC 61131-2) — Confirm the revision of the installed unit before a like-for-like replacement.
- Mounting: DIN rail / panel — Use it as the reference when cross-checking a current-production equivalent.
- Enclosure rating: IP20 (IEC 60529) — Verify it in the project documentation before confirming the order.
- Operating temperature: 0...+55 °C (IEC 60068-2-1) — Check this value against the nameplate of the installed unit before ordering.
Available from stock with datasheet, certificates and a quotation on request.
Common questions about 1769-SM2
Q.Before ordering 1769-SM2, which supply voltage entry should be checked?
The supply voltage entry quoted above is 24 V DC (IEC 61131-2). Use the value as the reference when sourcing a current-production equivalent.
Q.Where can I find the mounting data for 1769-SM2?
It is listed in the specification table for Allen-Bradley 1769-SM2 as DIN rail / panel. Check the revision of the installed unit if the catalog number has been superseded.
Q.For 1769-SM2, what does the specification table state about enclosure rating?
The specification table lists enclosure rating = IP20 (IEC 60529) for Allen-Bradley 1769-SM2. Compare it with the nameplate of the installed unit before ordering.
Q.Can the 1769-SM2 replace the unit currently installed in my panel?
Compare catalog number 1769-SM2 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.
Q.How do I confirm compatibility of 1769-SM2 before ordering?
Match the catalog number 1769-SM2 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.