Allen-Bradley · ControlLogix PLC platform
1756-M02ASK is an Allen-Bradley industrial component with Supply voltage 24 V DC (IEC 61131-2); Enclosure rating IP20 (IEC 60529); Operating temperature 0...+55 °C (IEC 60068-2-1). It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Supply voltage24 V DC (IEC 61131-2)
-
Enclosure ratingIP20 (IEC 60529)
-
Operating temperature0...+55 °C (IEC 60068-2-1)
-
MountingDIN rail / panel
Specifications
| Electrical |
| Supply voltage |
24 V DC (IEC 61131-2) |
| Mechanical |
| Mounting |
DIN rail / panel |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
0...+55 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Values follow the Allen-Bradley ControlLogix PLC platform specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Allen-Bradley ControlLogix PLC platform variants |
| Catalog number |
Mounting |
|
1756-M02ASK (this page) |
DIN rail / panel |
| 1756-M02AS |
DIN rail / panel |
| 1756-M02AE |
DIN rail / panel |
| 1756-M02AEK |
DIN rail / panel |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 1756-M02ASK is the device-level element in an Allen-Bradley industrial component installation. It receives the field signals and control supply listed above — 24 V DC (IEC 61131-2) — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides DIN rail / panel support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Allen-Bradley 1756-M02ASK
Allen-Bradley 1756-M02ASK — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 1756-M02ASK; confirm the installed unit's part number and revision so the replacement matches both electrically and mechanically.
- Certifications: CE, UL, cULus — Match it to the existing panel and upstream protection.
- Supply voltage: 24 V DC (IEC 61131-2) — Record it with the other nameplate data when sourcing a replacement.
- Mounting: DIN rail / panel — Confirm the revision of the installed unit before a like-for-like replacement.
- Enclosure rating: IP20 (IEC 60529) — Use it as the reference when cross-checking a current-production equivalent.
Datasheets and compliance documents are available on request; quote the full catalog number when enquiring.
Common questions about 1756-M02ASK
Q.Where can I find the enclosure rating data for 1756-M02ASK?
It is listed in the specification table for Allen-Bradley 1756-M02ASK as IP20 (IEC 60529). Check the revision of the installed unit if the catalog number has been superseded.
Q.For 1756-M02ASK, what does the specification table state about operating temperature?
The specification table lists operating temperature = 0...+55 °C (IEC 60068-2-1) for Allen-Bradley 1756-M02ASK. Compare it with the nameplate of the installed unit before ordering.
Q.Which value is published under certifications for catalog number 1756-M02ASK?
For 1756-M02ASK, certifications is given as CE, UL, cULus. Confirm this figure against the unit currently in the panel.
Q.Can the 1756-M02ASK replace the unit currently installed in my panel?
Compare catalog number 1756-M02ASK and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.
Q.How do I confirm compatibility of 1756-M02ASK before ordering?
Match the catalog number 1756-M02ASK and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.