Allen-Bradley · Point I/O module
1734-AENTRK is an Allen-Bradley I/O module with Supply voltage 24 V DC (IEC 61131-2); Enclosure rating IP20 (IEC 60529); Communication ports EtherNet/IP, DeviceNet. It is used in packaging machines, conveyor transfer cells, small process skids where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Supply voltage24 V DC (IEC 61131-2)
-
Enclosure ratingIP20 (IEC 60529)
-
Mounting35 mm DIN rail (IEC 60715)
Specifications
| Electrical |
| Supply voltage |
24 V DC (IEC 61131-2) |
| Mechanical |
| Mounting |
35 mm DIN rail (IEC 60715) |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
0...+55 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Values follow the Allen-Bradley Point I/O module specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Allen-Bradley Point I/O module variants |
| Catalog number |
Supply voltage |
|
1734-AENTRK (this page) |
24 V DC (IEC 61131-2) |
| 1734-AENTR |
24 V DC (IEC 61131-2) |
| 1734-AENTR-CC |
24 V DC (IEC 61131-2) |
| 1734-AENT |
24 V DC (IEC 61131-2) |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 1734-AENTRK is the device-level element in an Allen-Bradley I/O module installation. It receives the field signals and control supply listed above — 24 V DC (IEC 61131-2) — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in packaging machines, conveyor transfer cells, small process skids, where the unit is matched to the original catalog number and the enclosure provides 35 mm DIN rail (IEC 60715) support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Allen-Bradley 1734-AENTRK
Allen-Bradley 1734-AENTRK — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 1734-AENTRK; verify the catalog number against your bill of materials before requesting a quotation.
- Supply voltage: 24 V DC (IEC 61131-2) — Confirm the revision of the installed unit before a like-for-like replacement.
- Operating temperature: 0...+55 °C (IEC 60068-2-1) — Use it as the reference when cross-checking a current-production equivalent.
- Mounting: 35 mm DIN rail (IEC 60715) — Verify it in the project documentation before confirming the order.
- Enclosure rating: IP20 (IEC 60529) — Check this value against the nameplate of the installed unit before ordering.
For a discontinued unit, match function and electrical ratings rather than the label alone.
Common questions about 1734-AENTRK
Q.Where can I find the supply voltage data for 1734-AENTRK?
It is listed in the specification table for Allen-Bradley 1734-AENTRK as 24 V DC (IEC 61131-2). Confirm this figure against the unit currently in the panel.
Q.For 1734-AENTRK, what does the specification table state about operating temperature?
The specification table lists operating temperature = 0...+55 °C (IEC 60068-2-1) for Allen-Bradley 1734-AENTRK. Use the value as the reference when sourcing a current-production equivalent.
Q.Which value is published under enclosure rating for catalog number 1734-AENTRK?
For 1734-AENTRK, enclosure rating is given as IP20 (IEC 60529). Check the revision of the installed unit if the catalog number has been superseded.
Q.What should I include in an enquiry for 1734-AENTRK?
Send the full catalog number 1734-AENTRK, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Allen-Bradley 1734-AENTRK.
Q.Can the 1734-AENTRK replace the unit currently installed in my panel?
Compare catalog number 1734-AENTRK and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.