ABB · PSR
PSR16-600-700 is an ABB contactor with Rated current Ie 16 A (AC-53a); Coil voltage 24 V AC/DC or 208-400 V AC (variant); Rated operational voltage <= 690 V AC. It is used in motor starters, pump control panels, HVAC contactor banks where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Rated current Ie16 A (AC-53a)
-
Coil voltage24 V AC/DC or 208-400 V AC (variant)
-
Rated operational voltage<= 690 V AC
-
Supply voltage1-phase 200...240 V / 3-phase 380...480 V AC
Specifications
| Electrical |
| Rated current Ie |
16 A (AC-53a) |
| Rated operational voltage |
<= 690 V AC |
| Coil voltage |
24 V AC/DC or 208-400 V AC (variant) |
| Supply voltage |
1-phase 200...240 V / 3-phase 380...480 V AC |
| Frequency |
50/60 Hz (IEC 61800-2) |
| Control method |
V/f, sensorless vector (IEC 61800-2) |
| Overload capacity |
150 % for 60 s (IEC 61800-2) |
| I/O and communication |
| Bus interface |
Profibus DP / Modbus RTU / Modbus TCP (option) |
| Communication ports |
Modbus, PROFINET, Ethernet |
| Mechanical |
| Mounting |
DIN rail / panel mount |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
-25...+60 °C |
| Certifications |
CE, UL, CSA, CCC |
Values follow the ABB PSR specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| ABB PSR variants |
| Catalog number |
Rated current Ie |
Coil voltage |
|
PSR16-600-700 (this page) |
16 A (AC-53a) |
24 V AC/DC or 208-400 V AC (variant) |
| PSR25-600-11 |
25 A (AC-53a) |
24 V AC/DC or 208-400 V AC (variant) |
| PSR3-600-700 |
3 A (AC-53a) |
24 V AC/DC or 208-400 V AC (variant) |
| PSR30-600-11 |
30 A (AC-53a) |
24 V AC/DC or 208-400 V AC (variant) |
All variants share the same PSR footprint and terminal layout; the columns above show where they differ. Selecting a different catalog number changes the electrical interface, not the mounting.
Where it sits in the control system
The PSR16-600-700 is the device-level element in an ABB contactor installation. It receives the field signals and control supply listed above — 1-phase 200...240 V / 3-phase 380...480 V AC — and switches or conditions the load within the 16 A (AC-53a) ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in motor starters, pump control panels, HVAC contactor banks, where the unit is matched to the original catalog number and the enclosure provides DIN rail / panel mount support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Before you specify
-
Coil supply. Match the coil voltage (24 V AC/DC or 208-400 V AC (variant)) to the control circuit; a 24 V DC coil will not pull in on a 230 V AC supply.
-
Load rating. Size the contactor to AC-3 duty at 16 A (AC-53a); resistive and motor starts derate differently, so check the utilisation category.
-
Auxiliary contacts. Confirm the auxiliary contact arrangement (fitted auxiliary contacts) matches the interlock and status wiring before ordering.
-
Mounting. Verify the DIN rail / panel mount arrangement fits the existing enclosure cutout.
Technical FAQ
Q.What supply does this device require?
It requires 1-phase 200...240 V / 3-phase 380...480 V AC. Size the supply source to the same rating shown in the Specifications table.
Q.What are the key electrical ratings?
The confirmed ratings include 16 A (AC-53a) and CE, UL, CSA, CCC marking. Cross-check them against the installed unit's nameplate.
Q.How is this device mounted?
It mounts by DIN rail / panel mount. Confirm the cutout or rail before ordering a like-for-like spare.
Q.What is the operating temperature range?
The confirmed operating range is -25...+60 °C. Panels running beyond it need derated sizing.
Q.What replaces a unit that is no longer in production?
For a like-for-like spare, record the catalog number and revision from the nameplate; a current-production equivalent is identified by matching function and ratings.