ABB · Relay
1SVR360563R1001 is an ABB industrial component with Rated current Ie 10 A; Rated operational voltage 250 V; Enclosure rating IP20 (IEC 60529). It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Rated current Ie10 A
-
Rated operational voltage250 V
-
Enclosure ratingIP20 (IEC 60529)
-
Operating temperature0...+55 °C (IEC 60068-2-1)
Specifications
| Electrical |
| Rated current Ie |
10 A |
| Rated operational voltage |
250 V |
| Rated insulation voltage Ui |
690 V (IEC 60947-4-1) |
| Rated impulse withstand Uimp |
6 kV (IEC 60947-4-1) |
| I/O and communication |
| Communication ports |
Modbus, PROFINET, Ethernet |
| Mechanical |
| Mounting |
DIN rail / panel |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
0...+55 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, CSA, CCC |
Values follow the ABB Relay specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| ABB Relay variants |
| Catalog number |
Rated current Ie |
Rated operational voltage |
Mounting |
|
1SVR360563R1001 (this page) |
10 A |
250 V |
DIN rail / panel |
| 1SVR360663R1001 |
10 A |
250 V |
DIN rail / panel |
| 1SVR405650R1000 |
10 A |
250 V |
DIN rail / panel |
| 1SVR405651R0000 |
10 A |
250 V |
DIN rail / panel |
All variants share the same Relay footprint and terminal layout; the columns above show where they differ. Selecting a different catalog number changes the electrical interface, not the mounting.
Where it sits in the control system
The 1SVR360563R1001 is the device-level element in an ABB industrial component installation. It receives the field signals and control supply listed above — 250 V — and switches or conditions the load within the 10 A ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides DIN rail / panel support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Before you specify
-
Ratings. Confirm the rated current and voltage match the circuit before specifying; sizing from the nameplate avoids field mismatch.
-
Mounting. Check the DIN rail / panel fit against the existing enclosure before ordering.
-
Marking. Record the catalog number and revision from the nameplate of the installed unit for a like-for-like spare.
Technical FAQ
Q.What supply does this device require?
It requires 250 V. Size the supply source to the same rating shown in the Specifications table.
Q.What are the key electrical ratings?
The confirmed ratings include 10 A and CE, UL, CSA, CCC marking. Cross-check them against the installed unit's nameplate.
Q.How is this device mounted?
It mounts by DIN rail / panel. Confirm the cutout or rail before ordering a like-for-like spare.
Q.What is the operating temperature range?
The confirmed operating range is 0...+55 °C (IEC 60068-2-1). Panels running beyond it need derated sizing.
Q.What replaces a unit that is no longer in production?
For a like-for-like spare, record the catalog number and revision from the nameplate; a current-production equivalent is identified by matching function and ratings.