ABB · ACH550
ACH550-UH-059A-4 is an ABB industrial component with Rated current Ie 59 A; Supply voltage 1-phase 200...240 V / 3-phase 380...480 V AC; Enclosure rating IP20 (IEC 60529). It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Rated current Ie59 A
-
Supply voltage1-phase 200...240 V / 3-phase 380...480 V AC
-
Enclosure ratingIP20 (IEC 60529)
-
Operating temperature-10...+60 °C (IEC 60068-2-1)
Specifications
| Electrical |
| Rated current Ie |
59 A |
| Supply voltage |
1-phase 200...240 V / 3-phase 380...480 V AC |
| Input voltage range |
380 ... 480 V |
| Frequency |
50/60 Hz (IEC 61800-2) |
| Control method |
V/f, sensorless vector (IEC 61800-2) |
| Overload capacity |
150 % for 60 s (IEC 61800-2) |
| I/O and communication |
| Bus interface |
ABB FPBA-01 / FENA-21 / FECA-01 / FCAN-01 (adapter module) |
| Communication ports |
Modbus, PROFINET, Ethernet |
| Mechanical |
| Mounting |
Wall / cabinet mount |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
-10...+60 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, CSA, CCC |
Values follow the ABB ACH550 specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| ABB ACH550 variants |
| Catalog number |
Rated current Ie |
Mounting |
|
ACH550-UH-059A-4 (this page) |
59 A |
Wall / cabinet mount |
| ACH550-UH-011A-6 |
11 A |
Wall / cabinet mount |
| ACH550-UH-012A-2 |
12 A |
Wall / cabinet mount |
| ACH550-UH-012A-4 |
12 A |
DIN rail / panel |
All variants share the same ACH550 footprint and terminal layout; the columns above show where they differ. Selecting a different catalog number changes the electrical interface, not the mounting.
Where it sits in the control system
The ACH550-UH-059A-4 is the device-level element in an ABB industrial component installation. It receives the field signals and control supply listed above — 1-phase 200...240 V / 3-phase 380...480 V AC — and switches or conditions the load within the 59 A ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides Wall / cabinet mount support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Before you specify
-
Ratings. Confirm the rated current and voltage match the circuit before specifying; sizing from the nameplate avoids field mismatch.
-
Mounting. Check the Wall / cabinet mount fit against the existing enclosure before ordering.
-
Marking. Record the catalog number and revision from the nameplate of the installed unit for a like-for-like spare.
Technical FAQ
Q.What supply does this device require?
It requires 1-phase 200...240 V / 3-phase 380...480 V AC. Size the supply source to the same rating shown in the Specifications table.
Q.What are the key electrical ratings?
The confirmed ratings include 59 A and CE, UL, CSA, CCC marking. Cross-check them against the installed unit's nameplate.
Q.How is this device mounted?
It mounts by Wall / cabinet mount. Confirm the cutout or rail before ordering a like-for-like spare.
Q.What is the operating temperature range?
The confirmed operating range is -10...+60 °C (IEC 60068-2-1). Panels running beyond it need derated sizing.
Q.What replaces a unit that is no longer in production?
For a like-for-like spare, record the catalog number and revision from the nameplate; a current-production equivalent is identified by matching function and ratings.