Omron · Pushbutton / pilot light
A22NE-M-P102-N is an Omron industrial component with Enclosure rating IP20 (IEC 60529); Operating temperature 0...+55 °C (IEC 60068-2-1); Mounting DIN rail / panel. It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Enclosure ratingIP20 (IEC 60529)
-
Operating temperature0...+55 °C (IEC 60068-2-1)
-
MountingDIN rail / panel
-
CertificationsCE, UL, cULus
Specifications
| Mechanical |
| Mounting |
DIN rail / panel |
| Terminal type |
Push-In Plus |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
0...+55 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Values follow the Omron Pushbutton / pilot light specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Omron Pushbutton / pilot light variants |
| Catalog number |
Mounting |
|
A22NE-M-P102-N (this page) |
DIN rail / panel |
| A22NE-M-P202-N |
DIN rail / panel |
| A22NE-S-P222-N |
DIN rail / panel |
| A22E-L |
DIN rail / panel |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The A22NE-M-P102-N is the device-level element in an Omron industrial component installation. It receives the field signals and control supply listed above — the rated supply — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides DIN rail / panel support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Omron A22NE-M-P102-N
Omron A22NE-M-P102-N — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number A22NE-M-P102-N; confirm the installed unit's part number and revision so the replacement matches both electrically and mechanically.
- Terminal type: Push-In Plus — Match it to the existing panel and upstream protection.
- Certifications: CE, UL, cULus — Record it with the other nameplate data when sourcing a replacement.
- Mounting: DIN rail / panel — Confirm the revision of the installed unit before a like-for-like replacement.
- Enclosure rating: IP20 (IEC 60529) — Use it as the reference when cross-checking a current-production equivalent.
Cross-check the ratings above with the installed device before confirming the order.
Common questions about A22NE-M-P102-N
Q.Where can I find the enclosure rating data for A22NE-M-P102-N?
It is listed in the specification table for Omron A22NE-M-P102-N as IP20 (IEC 60529). Check the revision of the installed unit if the catalog number has been superseded.
Q.For A22NE-M-P102-N, what does the specification table state about operating temperature?
The specification table lists operating temperature = 0...+55 °C (IEC 60068-2-1) for Omron A22NE-M-P102-N. Compare it with the nameplate of the installed unit before ordering.
Q.Which value is published under certifications for catalog number A22NE-M-P102-N?
For A22NE-M-P102-N, certifications is given as CE, UL, cULus. Confirm this figure against the unit currently in the panel.
Q.Can the A22NE-M-P102-N replace the unit currently installed in my panel?
Compare catalog number A22NE-M-P102-N and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.
Q.How do I confirm compatibility of A22NE-M-P102-N before ordering?
Match the catalog number A22NE-M-P102-N and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.