Schneider Electric · PLC Cable / Accessory
490NTW00012 is a Schneider Electric industrial component with Rated current Ie up to 4 A; Enclosure rating IP20 (IEC 60529); Operating temperature 0...+55 °C (IEC 60068-2-1). It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Rated current Ieup to 4 A
-
Enclosure ratingIP20 (IEC 60529)
-
Operating temperature0...+55 °C (IEC 60068-2-1)
-
MountingDIN rail / panel
Specifications
| Electrical |
| Rated current Ie |
up to 4 A |
| Mechanical |
| Mounting |
DIN rail / panel |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
0...+55 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, CSA, CCC, EAC, Marine |
Values follow the Schneider Electric PLC Cable / Accessory specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Schneider Electric PLC Cable / Accessory variants |
| Catalog number |
Rated current Ie |
Mounting |
|
490NTW00012 (this page) |
up to 4 A |
DIN rail / panel |
| 490NTW00002 |
up to 4 A |
DIN rail / panel |
| 490NTW00005 |
up to 4 A |
DIN rail / panel |
| 490NTC00005 |
up to 4 A |
DIN rail / panel |
Verify model-specific dimensions, terminals and installation requirements in the manufacturer documentation before selecting an alternative.
Where it sits in the control system
The 490NTW00012 is the device-level element in a Schneider Electric industrial component installation. It receives the field signals and control supply listed above — the rated supply — and switches or conditions the load within the up to 4 A ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides DIN rail / panel support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Schneider Electric 490NTW00012
Schneider Electric 490NTW00012 Industrial Cable. See the manufacturer product information for this catalog number.
- Operating temperature: 0...+55 °C (IEC 60068-2-1) — Match it to the existing panel and upstream protection.
- Mounting: DIN rail / panel — Record it with the other nameplate data when sourcing a replacement.
- Certifications: CE, UL, CSA, CCC, EAC, Marine — Confirm the revision of the installed unit before a like-for-like replacement.
- Rated current Ie: up to 4 A — Use it as the reference when cross-checking a current-production equivalent.
Datasheets and compliance documents are available on request; quote the full catalog number when enquiring.
Common questions about 490NTW00012
Q.Where can I find the rated current Ie data for 490NTW00012?
It is listed in the specification table for Schneider Electric 490NTW00012 as up to 4 A. Use the value as the reference when sourcing a current-production equivalent.
Q.For 490NTW00012, what does the specification table state about mounting?
The specification table lists mounting = DIN rail / panel for Schneider Electric 490NTW00012. Check the revision of the installed unit if the catalog number has been superseded.
Q.Which value is published under certifications for catalog number 490NTW00012?
For 490NTW00012, certifications is given as CE, UL, CSA, CCC, EAC, Marine. Compare it with the nameplate of the installed unit before ordering.
Q.How do I confirm compatibility of 490NTW00012 before ordering?
Match the catalog number 490NTW00012 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.
Q.What should I include in an enquiry for 490NTW00012?
Send the full catalog number 490NTW00012, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Schneider Electric 490NTW00012.