Schneider Electric · PLC Cable / Accessory
490NTC00005 is a Schneider Electric industrial component with Rated current Ie up to 4 A; Enclosure rating IP20 (IEC 60529); Operating temperature 0...+55 °C (IEC 60068-2-1). It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Rated current Ieup to 4 A
-
Enclosure ratingIP20 (IEC 60529)
-
Operating temperature0...+55 °C (IEC 60068-2-1)
-
MountingDIN rail / panel
Specifications
| Electrical |
| Rated current Ie |
up to 4 A |
| Mechanical |
| Mounting |
DIN rail / panel |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
0...+55 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, CSA, CCC, EAC, Marine |
Values follow the Schneider Electric PLC Cable / Accessory specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Schneider Electric PLC Cable / Accessory variants |
| Catalog number |
Rated current Ie |
Mounting |
|
490NTC00005 (this page) |
up to 4 A |
DIN rail / panel |
| 490NTW00002 |
up to 4 A |
DIN rail / panel |
| 490NTW00005 |
up to 4 A |
DIN rail / panel |
| 490NTW00012 |
up to 4 A |
DIN rail / panel |
Verify model-specific dimensions, terminals and installation requirements in the manufacturer documentation before selecting an alternative.
Where it sits in the control system
The 490NTC00005 is the device-level element in a Schneider Electric industrial component installation. It receives the field signals and control supply listed above — the rated supply — and switches or conditions the load within the up to 4 A ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides DIN rail / panel support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Schneider Electric 490NTC00005
Schneider Electric 490NTC00005 Industrial Cable. See the manufacturer product information for this catalog number.
- Mounting: DIN rail / panel — Verify it in the project documentation before confirming the order.
- Rated current Ie: up to 4 A — Check this value against the nameplate of the installed unit before ordering.
- Enclosure rating: IP20 (IEC 60529) — Match it to the existing panel and upstream protection.
- Certifications: CE, UL, CSA, CCC, EAC, Marine — Record it with the other nameplate data when sourcing a replacement.
Available from stock with datasheet, certificates and a quotation on request.
Common questions about 490NTC00005
Q.For 490NTC00005, what does the specification table state about enclosure rating?
The specification table lists enclosure rating = IP20 (IEC 60529) for Schneider Electric 490NTC00005. Use the value as the reference when sourcing a current-production equivalent.
Q.Which value is published under rated current Ie for catalog number 490NTC00005?
For 490NTC00005, rated current Ie is given as up to 4 A. Check the revision of the installed unit if the catalog number has been superseded.
Q.Before ordering 490NTC00005, which operating temperature entry should be checked?
The operating temperature entry quoted above is 0...+55 °C (IEC 60068-2-1). Compare it with the nameplate of the installed unit before ordering.
Q.Can the 490NTC00005 replace the unit currently installed in my panel?
Compare catalog number 490NTC00005 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.
Q.How do I confirm compatibility of 490NTC00005 before ordering?
Match the catalog number 490NTC00005 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.