Phoenix Contact · Remote I/O Module
2985071 is a Phoenix Contact industrial component with Supply voltage 24 V DC (IEC 61131-2); Enclosure rating IP20 (IEC 60529); Operating temperature 0...+55 °C (IEC 60068-2-1). It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Supply voltage24 V DC (IEC 61131-2)
-
Enclosure ratingIP20 (IEC 60529)
-
Operating temperature0...+55 °C (IEC 60068-2-1)
-
MountingDIN rail / panel
Specifications
| Electrical |
| Supply voltage |
24 V DC (IEC 61131-2) |
| Rated speed |
10/100 Mbps |
| Mechanical |
| Weight |
720.4 g |
| Mounting |
DIN rail / panel |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
0...+55 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Values follow the Phoenix Contact Remote I/O Module specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Remote I/O Module variants |
| Catalog number |
Mounting |
|
2985071 (this page) |
DIN rail / panel |
| 2985314 |
35 mm DIN rail (IEC 60715) |
| 2985631 |
35 mm DIN rail (IEC 60715) |
| 2985688 |
35 mm DIN rail (IEC 60715) |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 2985071 is the device-level element in a Phoenix Contact industrial component installation. It receives the field signals and control supply listed above — 24 V DC (IEC 61131-2) — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides DIN rail / panel support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 2985071
Phoenix Contact 2985071 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 2985071; confirm the installed unit's part number and revision so the replacement matches both electrically and mechanically.
- Certifications: CE, UL, cULus — Check this value against the nameplate of the installed unit before ordering.
- Supply voltage: 24 V DC (IEC 61131-2) — Match it to the existing panel and upstream protection.
- Rated speed: 10/100 Mbps — Record it with the other nameplate data when sourcing a replacement.
- Enclosure rating: IP20 (IEC 60529) — Confirm the revision of the installed unit before a like-for-like replacement.
Datasheets and compliance documents are available on request; quote the full catalog number when enquiring.
Common questions about 2985071
Q.Which value is published under supply voltage for catalog number 2985071?
For 2985071, supply voltage is given as 24 V DC (IEC 61131-2). Confirm this figure against the unit currently in the panel.
Q.Before ordering 2985071, which weight entry should be checked?
The weight entry quoted above is 720.4 g. Use the value as the reference when sourcing a current-production equivalent.
Q.Where can I find the enclosure rating data for 2985071?
It is listed in the specification table for Phoenix Contact 2985071 as IP20 (IEC 60529). Check the revision of the installed unit if the catalog number has been superseded.
Q.What should I include in an enquiry for 2985071?
Send the full catalog number 2985071, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 2985071.
Q.How do I confirm compatibility of 2985071 before ordering?
Match the catalog number 2985071 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.