Couldn't load pickup availability
Got questions?
Feel free to get in touch
Ask an expert!
Phoenix Contact · Network Switch
2897402 is a Phoenix Contact circuit breaker with Tripping characteristic 8 mm; Breaking capacity Icu/Ics Copper; Supply voltage 24 V DC (IEC 61131-2). It is used in distribution boards, motor protection circuits, panel feeders where the installed unit is matched to the original catalog number and a compact, documented part is required.
| Electrical | |
| Breaking capacity Icu/Ics | Copper |
|---|---|
| Tripping characteristic | 8 mm |
| Supply voltage | 24 V DC (IEC 61131-2) |
| Rated speed | 500 kbps |
| I/O and communication | |
| Bus interface | 96 bit |
| Resolution | 24 bit |
| Mechanical | |
| Dimensions (H x W x D) | Housing dimensions |
| Weight | 211.6 g |
| Mounting | 35 mm DIN rail (IEC 60715) |
| Terminal wire size | 0.08 mm² ... 1.5 mm² |
| Enclosure rating | IP20 (IEC 60529) |
| Environment and compliance | |
| Operating temperature | 0...+55 °C (IEC 60068-2-1) |
| Certifications | CE, UL, cULus |
| Humidity | 10 % ... 95 % (non-condensing) |
Values follow the Phoenix Contact Network Switch specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
| Phoenix Contact Network Switch variants | |||
| Catalog number | Tripping characteristic | Breaking capacity Icu/Ics | |
|---|---|---|---|
| 2897402 (this page) | 8 mm | Copper | |
| 2891002 | 7 mm | Ethernet in RJ45 twisted pair | |
| 2891003 | 7 mm | Ethernet in RJ45 twisted pair | |
| 2891004 | 7 mm | Ethernet in RJ45 twisted pair | |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
The 2897402 is the device-level element in a Phoenix Contact circuit breaker installation. It receives the field signals and control supply listed above — 24 V DC (IEC 61131-2) — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in distribution boards, motor protection circuits, panel feeders, where the unit is matched to the original catalog number and the enclosure provides 35 mm DIN rail (IEC 60715) support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Phoenix Contact 2897402 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 2897402; record the nameplate data of the unit being replaced before selecting an equivalent.
For a discontinued unit, match function and electrical ratings rather than the label alone.
Q.Before ordering 2897402, which humidity entry should be checked?
The humidity entry quoted above is 10 % ... 95 % (non-condensing). Compare it with the nameplate of the installed unit before ordering.
Q.Where can I find the terminal wire size data for 2897402?
It is listed in the specification table for Phoenix Contact 2897402 as 0.08 mm² ... 1.5 mm². Confirm this figure against the unit currently in the panel.
Q.For 2897402, what does the specification table state about certifications?
The specification table lists certifications = CE, UL, cULus for Phoenix Contact 2897402. Use the value as the reference when sourcing a current-production equivalent.
Q.Can the 2897402 replace the unit currently installed in my panel?
Compare catalog number 2897402 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.
Q.What should I include in an enquiry for 2897402?
Send the full catalog number 2897402, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 2897402.
Standard (US & Canada, tracked courier): delivered in 5–8 business days. In-stock items are processed within 2–4 business days. USD 25 flat rate on orders under $500.00; free on orders of $500.00 and above.
Express (DHL Express / FedEx International): upgraded expedited delivery in 2–4 business days. The Express surcharge is calculated at checkout based on destination and order weight.
Non-Stock / On-Order items ship on request: dispatch time is confirmed before your order — see our Shipping Policy. Shipping charges and available services are displayed at checkout. See the Shipping Policy for details.
Every product is covered by a 12-month seller warranty provided by SHLY-PLC, effective from the date of delivery, against defects in materials and workmanship under normal use.
This warranty does not cover damage from misuse, improper installation, power surges, neglect, unauthorized repair, or normal wear and tear. See our Return Policy for warranty-claim instructions.
No reviews yet. Be the first to review this product!
