Couldn't load pickup availability
Got questions?
Feel free to get in touch
Ask an expert!
Phoenix Contact · Monitoring Relay
2864464 is a Phoenix Contact variable-frequency drive with Overload capacity 2 x I N ( continuous); Enclosure rating IP20 (IEC 60529); Frequency 45 Hz ... 60 Hz. It is used in pump sets, conveyor belts, fan and compressor drives where the installed unit is matched to the original catalog number and a compact, documented part is required.
| Electrical | |
| Rated insulation voltage Ui | 690 V (IEC 60947-4-1) |
|---|---|
| Rated impulse withstand Uimp | 6 kV (IEC 60947-4-1) |
| Tripping characteristic | 8 mm |
| Supply voltage | 20 V DC ... 30 V DC |
| Frequency | 45 Hz ... 60 Hz |
| Overload capacity | 2 x I N ( continuous) |
| I/O and communication | |
| Response time | 40 ms |
| Mechanical | |
| Weight | 160 g |
| Mounting | 35 mm DIN rail (IEC 60715) |
| Terminal wire size | 0.2 mm² ... 2.5 mm² |
| Enclosure rating | IP20 (IEC 60529) |
| Environment and compliance | |
| Operating temperature | -25...+60 °C (IEC 60068-2-1) |
| Certifications | CE, UL, cULus |
| Humidity | 10 % ... 95 % (non-condensing) |
Values follow the Phoenix Contact Monitoring Relay specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
| Phoenix Contact Monitoring Relay variants | |||
| Catalog number | Overload capacity | Frequency | |
|---|---|---|---|
| 2864464 (this page) | 2 x I N ( continuous) | 45 Hz ... 60 Hz | |
| 2866019 | 800 mA (at I N = 100 mA) | 48 Hz ... 63 Hz | |
| 2866022 | 800 mA (at I N = 100 mA) | 48 Hz ... 400 Hz | |
| 2866035 | — | 50 Hz ... 60 Hz | |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
The 2864464 is the device-level element in a Phoenix Contact variable-frequency drive installation. It receives the field signals and control supply listed above — 20 V DC ... 30 V DC — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in pump sets, conveyor belts, fan and compressor drives, where the unit is matched to the original catalog number and the enclosure provides 35 mm DIN rail (IEC 60715) support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Phoenix Contact 2864464 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 2864464; size the surrounding wiring and upstream protection to these published ratings rather than to a generic assumption.
Cross-check the ratings above with the installed device before confirming the order.
Q.Which value is published under weight for catalog number 2864464?
For 2864464, weight is given as 160 g. Confirm this figure against the unit currently in the panel.
Q.Before ordering 2864464, which terminal wire size entry should be checked?
The terminal wire size entry quoted above is 0.2 mm² ... 2.5 mm². Use the value as the reference when sourcing a current-production equivalent.
Q.Where can I find the certifications data for 2864464?
It is listed in the specification table for Phoenix Contact 2864464 as CE, UL, cULus. Check the revision of the installed unit if the catalog number has been superseded.
Q.What should I include in an enquiry for 2864464?
Send the full catalog number 2864464, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 2864464.
Q.How do I confirm compatibility of 2864464 before ordering?
Match the catalog number 2864464 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.
Standard (US & Canada, tracked courier): delivered in 5–8 business days. In-stock items are processed within 2–4 business days. USD 25 flat rate on orders under $500.00; free on orders of $500.00 and above.
Express (DHL Express / FedEx International): upgraded expedited delivery in 2–4 business days. The Express surcharge is calculated at checkout based on destination and order weight.
Non-Stock / On-Order items ship on request: dispatch time is confirmed before your order — see our Shipping Policy. Shipping charges and available services are displayed at checkout. See the Shipping Policy for details.
Every product is covered by a 12-month seller warranty provided by SHLY-PLC, effective from the date of delivery, against defects in materials and workmanship under normal use.
This warranty does not cover damage from misuse, improper installation, power surges, neglect, unauthorized repair, or normal wear and tear. See our Return Policy for warranty-claim instructions.
No reviews yet. Be the first to review this product!
