Couldn't load pickup availability
Got questions?
Feel free to get in touch
Ask an expert!
Phoenix Contact · Signal Conditioner
2861768 is a Phoenix Contact circuit breaker with Tripping characteristic 8 mm; Breaking capacity Icu/Ics Failure or overload of the encoder supply I/O error message; Supply voltage 7.5 V DC (via voltage jumper). It is used in distribution boards, motor protection circuits, panel feeders where the installed unit is matched to the original catalog number and a compact, documented part is required.
| Electrical | |
| Breaking capacity Icu/Ics | Failure or overload of the encoder supply I/O error message |
|---|---|
| Tripping characteristic | 8 mm |
| Supply voltage | 7.5 V DC (via voltage jumper) |
| Rated speed | 500 kbps |
| I/O and communication | |
| Bus interface | 32 bit |
| Mechanical | |
| Weight | 89.8 g |
| Mounting | DIN rail / panel |
| Terminal wire size | 0.08 mm² ... 1.5 mm² |
| Enclosure rating | IP20 (IEC 60529) |
| Environment and compliance | |
| Operating temperature | 0...+55 °C (IEC 60068-2-1) |
| Certifications | CE, UL, cULus |
| Humidity | 10 % ... 95 % (non-condensing) |
Values follow the Phoenix Contact Signal Conditioner specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
| Phoenix Contact Signal Conditioner variants | |||
| Catalog number | Breaking capacity Icu/Ics | Tripping characteristic | |
|---|---|---|---|
| 2861768 (this page) | Failure or overload of the encoder supply I/O error message | 8 mm | |
| 2861438 | — | — | |
| 2861454 | — | — | |
| 2861852 | Copper | 8 mm | |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
The 2861768 is the device-level element in a Phoenix Contact circuit breaker installation. It receives the field signals and control supply listed above — 7.5 V DC (via voltage jumper) — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in distribution boards, motor protection circuits, panel feeders, where the unit is matched to the original catalog number and the enclosure provides DIN rail / panel support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Phoenix Contact 2861768 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 2861768; verify the catalog number against your bill of materials before requesting a quotation.
Available from stock with datasheet, certificates and a quotation on request.
Q.Before ordering 2861768, which humidity entry should be checked?
The humidity entry quoted above is 10 % ... 95 % (non-condensing). Use the value as the reference when sourcing a current-production equivalent.
Q.Where can I find the rated speed data for 2861768?
It is listed in the specification table for Phoenix Contact 2861768 as 500 kbps. Check the revision of the installed unit if the catalog number has been superseded.
Q.For 2861768, what does the specification table state about certifications?
The specification table lists certifications = CE, UL, cULus for Phoenix Contact 2861768. Compare it with the nameplate of the installed unit before ordering.
Q.What should I include in an enquiry for 2861768?
Send the full catalog number 2861768, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 2861768.
Q.How do I confirm compatibility of 2861768 before ordering?
Match the catalog number 2861768 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.
Standard (US & Canada, tracked courier): delivered in 5–8 business days. In-stock items are processed within 2–4 business days. USD 25 flat rate on orders under $500.00; free on orders of $500.00 and above.
Express (DHL Express / FedEx International): upgraded expedited delivery in 2–4 business days. The Express surcharge is calculated at checkout based on destination and order weight.
Non-Stock / On-Order items ship on request: dispatch time is confirmed before your order — see our Shipping Policy. Shipping charges and available services are displayed at checkout. See the Shipping Policy for details.
Every product is covered by a 12-month seller warranty provided by SHLY-PLC, effective from the date of delivery, against defects in materials and workmanship under normal use.
This warranty does not cover damage from misuse, improper installation, power surges, neglect, unauthorized repair, or normal wear and tear. See our Return Policy for warranty-claim instructions.
No reviews yet. Be the first to review this product!
