Phoenix Contact · Network Switch Module
2835684 is a Phoenix Contact industrial component with Supply voltage 24 V DC (IEC 61131-2); Enclosure rating IP20 (IEC 60529); Operating temperature 0...+55 °C (IEC 60068-2-1). It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Supply voltage24 V DC (IEC 61131-2)
-
Enclosure ratingIP20 (IEC 60529)
-
Operating temperature0...+55 °C (IEC 60068-2-1)
-
MountingDIN rail / panel
Specifications
| Electrical |
| Supply voltage |
24 V DC (IEC 61131-2) |
| Power consumption |
typ. 0.84 W (24 V DC / 20 mA) |
| Frequency |
30 Hz |
| I/O and communication |
| Response time |
11 ms |
| Mechanical |
| Weight |
88.6 g |
| Mounting |
DIN rail / panel |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
0...+55 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Values follow the Phoenix Contact Network Switch Module specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Network Switch Module variants |
| Catalog number |
Mounting |
|
2835684 (this page) |
DIN rail / panel |
| 2835079 |
35 mm DIN rail (IEC 60715) |
| 2835341 |
35 mm DIN rail (IEC 60715) |
| 2835862 |
DIN rail / panel |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 2835684 is the device-level element in a Phoenix Contact industrial component installation. It receives the field signals and control supply listed above — 24 V DC (IEC 61131-2) — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides DIN rail / panel support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 2835684
Phoenix Contact 2835684 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 2835684; confirm the installed unit's part number and revision so the replacement matches both electrically and mechanically.
- Certifications: CE, UL, cULus — Confirm the revision of the installed unit before a like-for-like replacement.
- Supply voltage: 24 V DC (IEC 61131-2) — Use it as the reference when cross-checking a current-production equivalent.
- Weight: 88.6 g — Verify it in the project documentation before confirming the order.
- Operating temperature: 0...+55 °C (IEC 60068-2-1) — Check this value against the nameplate of the installed unit before ordering.
For a discontinued unit, match function and electrical ratings rather than the label alone.
Common questions about 2835684
Q.Where can I find the frequency data for 2835684?
It is listed in the specification table for Phoenix Contact 2835684 as 30 Hz. Compare it with the nameplate of the installed unit before ordering.
Q.For 2835684, what does the specification table state about weight?
The specification table lists weight = 88.6 g for Phoenix Contact 2835684. Confirm this figure against the unit currently in the panel.
Q.Which value is published under certifications for catalog number 2835684?
For 2835684, certifications is given as CE, UL, cULus. Use the value as the reference when sourcing a current-production equivalent.
Q.How do I confirm compatibility of 2835684 before ordering?
Match the catalog number 2835684 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.
Q.Can the 2835684 replace the unit currently installed in my panel?
Compare catalog number 2835684 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.