Couldn't load pickup availability
Got questions?
Feel free to get in touch
Ask an expert!
Phoenix Contact · Temperature Transmitter
2813457 is a Phoenix Contact variable-frequency drive with Overload capacity Depending on laid conductor; Enclosure rating IP66 / IP67 (IEC 60529); Frequency 30 Hz ... 6000 Hz. It is used in pump sets, conveyor belts, fan and compressor drives where the installed unit is matched to the original catalog number and a compact, documented part is required.
| Electrical | |
| Rated insulation voltage Ui | 300 V AC (to earth) |
|---|---|
| Tripping characteristic | 8 mm |
| Supply voltage | 11...30 V DC (loop powered) |
| Frequency | 30 Hz ... 6000 Hz |
| Overload capacity | Depending on laid conductor |
| Rated torque | 0.5 Nm ... 0.6 Nm (4,4 ... 5,31 lbf-in.) |
| Mechanical | |
| Weight | 145 g |
| Mounting | DIN rail mounting |
| Terminal wire size | 0.2 mm² ... 2.5 mm² |
| Enclosure rating | IP66 / IP67 (IEC 60529) |
| Environment and compliance | |
| Operating temperature | -40...+85 °C (IEC 60068-2-1) |
| Certifications | CE, UL, cULus |
Values follow the Phoenix Contact Temperature Transmitter specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
| Phoenix Contact Temperature Transmitter variants | |||
| Catalog number | Overload capacity | Frequency | |
|---|---|---|---|
| 2813457 (this page) | Depending on laid conductor | 30 Hz ... 6000 Hz | |
| 2813473 | Depending on laid conductor | 30 Hz ... 6000 Hz | |
| 2813486 | Depending on laid conductor | 30 Hz ... 6000 Hz | |
| 2813499 | Depending on laid conductor | 30 Hz ... 6000 Hz | |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
The 2813457 is the device-level element in a Phoenix Contact variable-frequency drive installation. It receives the field signals and control supply listed above — 11...30 V DC (loop powered) — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in pump sets, conveyor belts, fan and compressor drives, where the unit is matched to the original catalog number and the enclosure provides DIN rail mounting support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Phoenix Contact 2813457 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 2813457; record the nameplate data of the unit being replaced before selecting an equivalent.
Available from stock with datasheet, certificates and a quotation on request.
Q.Before ordering 2813457, which supply voltage entry should be checked?
The supply voltage entry quoted above is 11...30 V DC (loop powered). Check the revision of the installed unit if the catalog number has been superseded.
Q.Where can I find the frequency data for 2813457?
It is listed in the specification table for Phoenix Contact 2813457 as 30 Hz ... 6000 Hz. Compare it with the nameplate of the installed unit before ordering.
Q.For 2813457, what does the specification table state about tripping characteristic?
The specification table lists tripping characteristic = 8 mm for Phoenix Contact 2813457. Confirm this figure against the unit currently in the panel.
Q.What should I include in an enquiry for 2813457?
Send the full catalog number 2813457, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 2813457.
Q.How do I confirm compatibility of 2813457 before ordering?
Match the catalog number 2813457 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.
Standard (US & Canada, tracked courier): delivered in 5–8 business days. In-stock items are processed within 2–4 business days. USD 25 flat rate on orders under $500.00; free on orders of $500.00 and above.
Express (DHL Express / FedEx International): upgraded expedited delivery in 2–4 business days. The Express surcharge is calculated at checkout based on destination and order weight.
Non-Stock / On-Order items ship on request: dispatch time is confirmed before your order — see our Shipping Policy. Shipping charges and available services are displayed at checkout. See the Shipping Policy for details.
Every product is covered by a 12-month seller warranty provided by SHLY-PLC, effective from the date of delivery, against defects in materials and workmanship under normal use.
This warranty does not cover damage from misuse, improper installation, power surges, neglect, unauthorized repair, or normal wear and tear. See our Return Policy for warranty-claim instructions.
No reviews yet. Be the first to review this product!
