Phoenix Contact · Connection Cable
2761871 is a Phoenix Contact connection cable with Rated current Ie up to 4 A; Enclosure rating IP67 (IEC 60529); Operating temperature -25...+80 °C (IEC 60068-2-1). It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Rated current Ieup to 4 A
-
Enclosure ratingIP67 (IEC 60529)
-
Operating temperature-25...+80 °C (IEC 60068-2-1)
-
CertificationsCE, UL, cULus
Specifications
| Electrical |
| Rated current Ie |
up to 4 A |
| Tripping characteristic |
5 mm |
| Rated torque |
0.22 Nm ... 0.25 Nm |
| I/O and communication |
| Bus interface |
CANopen®, FIP |
| Mechanical |
| Weight |
58.6 g |
| Terminal type |
26 |
| Terminal wire size |
0.14 mm² |
| Enclosure rating |
IP67 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
-25...+80 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
| Humidity |
10 % ... 95 % (non-condensing) |
Values follow the Phoenix Contact Connection Cable specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Connection Cable variants |
| Catalog number |
Rated current Ie |
|
2761871 (this page) |
up to 4 A |
| 2761826 |
up to 4 A |
| 2761839 |
up to 4 A |
| 2761295 |
up to 4 A |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 2761871 is the device-level element in a Phoenix Contact connection cable installation. It receives the field signals and control supply listed above — the rated supply — and switches or conditions the load within the up to 4 A ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides standard panel or DIN-rail support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 2761871
Phoenix Contact 2761871 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 2761871; confirm the installed unit's part number and revision so the replacement matches both electrically and mechanically.
- Humidity: 10 % ... 95 % (non-condensing) — Check this value against the nameplate of the installed unit before ordering.
- Tripping characteristic: 5 mm — Match it to the existing panel and upstream protection.
- Terminal type: 26 — Record it with the other nameplate data when sourcing a replacement.
- Bus interface: CANopen®, FIP — Confirm the revision of the installed unit before a like-for-like replacement.
Available from stock with datasheet, certificates and a quotation on request.
Common questions about 2761871
Q.Before ordering 2761871, which tripping characteristic entry should be checked?
The tripping characteristic entry quoted above is 5 mm. Check the revision of the installed unit if the catalog number has been superseded.
Q.Where can I find the certifications data for 2761871?
It is listed in the specification table for Phoenix Contact 2761871 as CE, UL, cULus. Compare it with the nameplate of the installed unit before ordering.
Q.For 2761871, what does the specification table state about weight?
The specification table lists weight = 58.6 g for Phoenix Contact 2761871. Confirm this figure against the unit currently in the panel.
Q.How do I confirm compatibility of 2761871 before ordering?
Match the catalog number 2761871 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.
Q.Can the 2761871 replace the unit currently installed in my panel?
Compare catalog number 2761871 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.