Phoenix Contact · Connection Cable
2744403 is a Phoenix Contact connection cable with Rated current Ie up to 4 A; Enclosure rating IP67 (IEC 60529); Operating temperature -25...+80 °C (IEC 60068-2-1). It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Rated current Ieup to 4 A
-
Enclosure ratingIP67 (IEC 60529)
-
Operating temperature-25...+80 °C (IEC 60068-2-1)
-
CertificationsCE, UL, cULus
Specifications
| Electrical |
| Rated current Ie |
up to 4 A |
| Tripping characteristic |
9 mm |
| Rated torque |
0.4 Nm |
| I/O and communication |
| Bus interface |
PROFIBUS DP |
| Mechanical |
| Weight |
46.1 g |
| Terminal type |
26 |
| Terminal wire size |
0.12 mm² |
| Enclosure rating |
IP67 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
-25...+80 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
| Humidity |
10 % ... 95 % (non-condensing) |
Values follow the Phoenix Contact Connection Cable specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Connection Cable variants |
| Catalog number |
Rated current Ie |
|
2744403 (this page) |
up to 4 A |
| 2744018 |
up to 4 A |
| 2744089 |
up to 4 A |
| 2744102 |
up to 4 A |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 2744403 is the device-level element in a Phoenix Contact connection cable installation. It receives the field signals and control supply listed above — the rated supply — and switches or conditions the load within the up to 4 A ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides standard panel or DIN-rail support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 2744403
Phoenix Contact 2744403 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 2744403; size the surrounding wiring and upstream protection to these published ratings rather than to a generic assumption.
- Rated current Ie: up to 4 A — Match it to the existing panel and upstream protection.
- Bus interface: PROFIBUS DP — Record it with the other nameplate data when sourcing a replacement.
- Tripping characteristic: 9 mm — Confirm the revision of the installed unit before a like-for-like replacement.
- Weight: 46.1 g — Use it as the reference when cross-checking a current-production equivalent.
Cross-check the ratings above with the installed device before confirming the order.
Common questions about 2744403
Q.Where can I find the terminal wire size data for 2744403?
It is listed in the specification table for Phoenix Contact 2744403 as 0.12 mm². Compare it with the nameplate of the installed unit before ordering.
Q.For 2744403, what does the specification table state about humidity?
The specification table lists humidity = 10 % ... 95 % (non-condensing) for Phoenix Contact 2744403. Confirm this figure against the unit currently in the panel.
Q.Which value is published under rated torque for catalog number 2744403?
For 2744403, rated torque is given as 0.4 Nm. Use the value as the reference when sourcing a current-production equivalent.
Q.What should I include in an enquiry for 2744403?
Send the full catalog number 2744403, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 2744403.
Q.How do I confirm compatibility of 2744403 before ordering?
Match the catalog number 2744403 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.