Couldn't load pickup availability
Got questions?
Feel free to get in touch
Ask an expert!
Phoenix Contact · Communication Adapter
2708290 is a Phoenix Contact industrial component with Supply voltage 18 V DC ... 30 V DC (via pluggable COMBICON screw terminal block); Enclosure rating IP20 (IEC 60529); Operating temperature 0...+55 °C (IEC 60068-2-1). It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
| Electrical | |
| Tripping characteristic | 7.00 mm |
|---|---|
| Supply voltage | 18 V DC ... 30 V DC (via pluggable COMBICON screw terminal block) |
| Rated torque | 0.56 Nm ... 0.79 Nm |
| Rated speed | ≤ 12 Mbps |
| I/O and communication | |
| Protocols | Protocol-transparent to the RS-485 interface |
| Mechanical | |
| Weight | 246.8 g |
| Mounting | DIN rail / panel |
| Terminal type | 0.2 mm² ... 2.5 mm² |
| Terminal wire size | 24 ... 14 |
| Enclosure rating | IP20 (IEC 60529) |
| Environment and compliance | |
| Operating temperature | 0...+55 °C (IEC 60068-2-1) |
| Certifications | CE, UL, cULus |
| Humidity | 30 % ... 95 % (non-condensing) |
Values follow the Phoenix Contact Communication Adapter specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
| Phoenix Contact Communication Adapter variants | |||
| Catalog number | Mounting | ||
|---|---|---|---|
| 2708290 (this page) | DIN rail / panel | ||
| 2708203 | DIN rail / panel | ||
| 2708274 | DIN rail / panel | ||
| 2708041 | DIN rail / panel | ||
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
The 2708290 is the device-level element in a Phoenix Contact industrial component installation. It receives the field signals and control supply listed above — 18 V DC ... 30 V DC (via pluggable COMBICON screw terminal block) — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides DIN rail / panel support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Phoenix Contact 2708290 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 2708290; size the surrounding wiring and upstream protection to these published ratings rather than to a generic assumption.
Cross-check the ratings above with the installed device before confirming the order.
Q.Before ordering 2708290, which supply voltage entry should be checked?
The supply voltage entry quoted above is 18 V DC ... 30 V DC (via pluggable COMBICON screw terminal block). Check the revision of the installed unit if the catalog number has been superseded.
Q.Where can I find the enclosure rating data for 2708290?
It is listed in the specification table for Phoenix Contact 2708290 as IP20 (IEC 60529). Compare it with the nameplate of the installed unit before ordering.
Q.For 2708290, what does the specification table state about mounting?
The specification table lists mounting = DIN rail / panel for Phoenix Contact 2708290. Confirm this figure against the unit currently in the panel.
Q.What should I include in an enquiry for 2708290?
Send the full catalog number 2708290, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 2708290.
Q.How do I confirm compatibility of 2708290 before ordering?
Match the catalog number 2708290 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.
Standard (US & Canada, tracked courier): delivered in 5–8 business days. In-stock items are processed within 2–4 business days. USD 25 flat rate on orders under $500.00; free on orders of $500.00 and above.
Express (DHL Express / FedEx International): upgraded expedited delivery in 2–4 business days. The Express surcharge is calculated at checkout based on destination and order weight.
Non-Stock / On-Order items ship on request: dispatch time is confirmed before your order — see our Shipping Policy. Shipping charges and available services are displayed at checkout. See the Shipping Policy for details.
Every product is covered by a 12-month seller warranty provided by SHLY-PLC, effective from the date of delivery, against defects in materials and workmanship under normal use.
This warranty does not cover damage from misuse, improper installation, power surges, neglect, unauthorized repair, or normal wear and tear. See our Return Policy for warranty-claim instructions.
No reviews yet. Be the first to review this product!
