Couldn't load pickup availability
Got questions?
Feel free to get in touch
Ask an expert!
Phoenix Contact · Communication Module
2692380 is a Phoenix Contact circuit breaker with Tripping characteristic 8 mm; Breaking capacity Icu/Ics Short-circuit or overload of the digital outputs yes; Supply voltage 24 V DC (IEC 61131-2). It is used in distribution boards, motor protection circuits, panel feeders where the installed unit is matched to the original catalog number and a compact, documented part is required.
| Electrical | |
| Breaking capacity Icu/Ics | Short-circuit or overload of the digital outputs yes |
|---|---|
| Tripping characteristic | 8 mm |
| Supply voltage | 24 V DC (IEC 61131-2) |
| Output voltage | 24 V DC -1 V (At nominal current) |
| Output current | max. 2 A |
| Frequency | 0.5 Hz (1.2 H, 48 Ω) |
| Overload capacity | Auto restart |
| Rated speed | 500 kbps / 2 Mbps (automatic detection, no combined system) |
| I/O and communication | |
| Bus interface | max. 63 |
| Response time | approx. 500 µs |
| Mechanical | |
| Dimensions (H x W x D) | Specfications with connectors |
| Weight | 343.6 g |
| Mounting | 35 mm DIN rail (IEC 60715) |
| Terminal wire size | 100 m |
| Enclosure rating | IP20 (IEC 60529) |
| Environment and compliance | |
| Operating temperature | 0...+55 °C (IEC 60068-2-1) |
| Certifications | CE, UL, cULus |
| Humidity | 10 % ... 95 % (non-condensing) |
Values follow the Phoenix Contact Communication Module specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
| Phoenix Contact Communication Module variants | |||
| Catalog number | Breaking capacity Icu/Ics | Tripping characteristic | |
|---|---|---|---|
| 2692380 (this page) | Short-circuit or overload of the digital outputs yes | 8 mm | |
| 2692322 | Short-circuit or overload of the digital outputs yes | 8 mm | |
| 2688394 | Ethernet in RJ45 twisted pair | 8 mm | |
| 2688459 | Ethernet in RJ45 twisted pair | 8 mm | |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
The 2692380 is the device-level element in a Phoenix Contact circuit breaker installation. It receives the field signals and control supply listed above — 24 V DC (IEC 61131-2) — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in distribution boards, motor protection circuits, panel feeders, where the unit is matched to the original catalog number and the enclosure provides 35 mm DIN rail (IEC 60715) support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Phoenix Contact 2692380 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 2692380; always cross-check the catalog number and hardware revision on the nameplate before placing an order.
Datasheets and compliance documents are available on request; quote the full catalog number when enquiring.
Q.Before ordering 2692380, which mounting entry should be checked?
The mounting entry quoted above is 35 mm DIN rail (IEC 60715). Check the revision of the installed unit if the catalog number has been superseded.
Q.Where can I find the certifications data for 2692380?
It is listed in the specification table for Phoenix Contact 2692380 as CE, UL, cULus. Compare it with the nameplate of the installed unit before ordering.
Q.For 2692380, what does the specification table state about tripping characteristic?
The specification table lists tripping characteristic = 8 mm for Phoenix Contact 2692380. Confirm this figure against the unit currently in the panel.
Q.What should I include in an enquiry for 2692380?
Send the full catalog number 2692380, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 2692380.
Q.How do I confirm compatibility of 2692380 before ordering?
Match the catalog number 2692380 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.
Standard (US & Canada, tracked courier): delivered in 5–8 business days. In-stock items are processed within 2–4 business days. USD 25 flat rate on orders under $500.00; free on orders of $500.00 and above.
Express (DHL Express / FedEx International): upgraded expedited delivery in 2–4 business days. The Express surcharge is calculated at checkout based on destination and order weight.
Non-Stock / On-Order items ship on request: dispatch time is confirmed before your order — see our Shipping Policy. Shipping charges and available services are displayed at checkout. See the Shipping Policy for details.
Every product is covered by a 12-month seller warranty provided by SHLY-PLC, effective from the date of delivery, against defects in materials and workmanship under normal use.
This warranty does not cover damage from misuse, improper installation, power surges, neglect, unauthorized repair, or normal wear and tear. See our Return Policy for warranty-claim instructions.
No reviews yet. Be the first to review this product!
