Phoenix Contact · Fieldbus Coupler
2316375 is a Phoenix Contact industrial component with Supply voltage 24 V DC (IEC 61131-2); Enclosure rating IP20 (IEC 60529); Operating temperature 0...+55 °C (IEC 60068-2-1). It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Supply voltage24 V DC (IEC 61131-2)
-
Enclosure ratingIP20 (IEC 60529)
-
Operating temperature0...+55 °C (IEC 60068-2-1)
-
MountingDIN rail / panel
Specifications
| Electrical |
| Supply voltage |
24 V DC (IEC 61131-2) |
| Mechanical |
| Weight |
311.3 g |
| Mounting |
DIN rail / panel |
| Terminal wire size |
0.20 mm² ... 2.50 mm² |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
0...+55 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
| Humidity |
5 % ... 95 % (non-condensing) |
Values follow the Phoenix Contact Fieldbus Coupler specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Fieldbus Coupler variants |
| Catalog number |
Mounting |
|
2316375 (this page) |
DIN rail / panel |
| 2316370 |
35 mm DIN rail (IEC 60715) |
| 2316048 |
35 mm DIN rail (IEC 60715) |
| 2316050 |
35 mm DIN rail (IEC 60715) |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 2316375 is the device-level element in a Phoenix Contact industrial component installation. It receives the field signals and control supply listed above — 24 V DC (IEC 61131-2) — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides DIN rail / panel support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 2316375
Phoenix Contact 2316375 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 2316375; record the nameplate data of the unit being replaced before selecting an equivalent.
- Mounting: DIN rail / panel — Confirm the revision of the installed unit before a like-for-like replacement.
- Terminal wire size: 0.20 mm² ... 2.50 mm² — Use it as the reference when cross-checking a current-production equivalent.
- Weight: 311.3 g — Verify it in the project documentation before confirming the order.
- Enclosure rating: IP20 (IEC 60529) — Check this value against the nameplate of the installed unit before ordering.
For a discontinued unit, match function and electrical ratings rather than the label alone.
Common questions about 2316375
Q.Before ordering 2316375, which enclosure rating entry should be checked?
The enclosure rating entry quoted above is IP20 (IEC 60529). Compare it with the nameplate of the installed unit before ordering.
Q.Where can I find the operating temperature data for 2316375?
It is listed in the specification table for Phoenix Contact 2316375 as 0...+55 °C (IEC 60068-2-1). Confirm this figure against the unit currently in the panel.
Q.For 2316375, what does the specification table state about terminal wire size?
The specification table lists terminal wire size = 0.20 mm² ... 2.50 mm² for Phoenix Contact 2316375. Use the value as the reference when sourcing a current-production equivalent.
Q.Can the 2316375 replace the unit currently installed in my panel?
Compare catalog number 2316375 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.
Q.How do I confirm compatibility of 2316375 before ordering?
Match the catalog number 2316375 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.