Couldn't load pickup availability
Got questions?
Feel free to get in touch
Ask an expert!
Phoenix Contact · Communication Module
2316352 is a Phoenix Contact power supply with Output voltage 23.56 V DC (spurs); Output current 40.9 mA (spurs); Supply voltage 24 V DC (IEC 61131-2). It is used in DIN-rail control cabinets, sensor and relay supplies, backplane bus power where the installed unit is matched to the original catalog number and a compact, documented part is required.
| Electrical | |
| Supply voltage | 24 V DC (IEC 61131-2) |
|---|---|
| Output voltage | 23.56 V DC (spurs) |
| Output current | 40.9 mA (spurs) |
| Rated torque | 0.5 Nm ... 0.6 Nm |
| I/O and communication | |
| Bus interface | FF-846 |
| Mechanical | |
| Weight | 111.5 g |
| Mounting | 35 mm DIN rail (IEC 60715) |
| Terminal wire size | 2.50 mm² ... 0.20 mm² |
| Enclosure rating | IP20 (IEC 60529) |
| Environment and compliance | |
| Operating temperature | 0...+55 °C (IEC 60068-2-1) |
| Certifications | CE, UL, cULus |
| Humidity | 10 % ... 95 % (non-condensing) |
Values follow the Phoenix Contact Communication Module specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
| Phoenix Contact Communication Module variants | |||
| Catalog number | Output current | Output voltage | |
|---|---|---|---|
| 2316352 (this page) | 40.9 mA (spurs) | 23.56 V DC (spurs) | |
| 2316307 | 56 mA (Branch line) | — | |
| 2316310 | 56 mA (Branch line) | — | |
| 2316312 | 250 mA | 16.7 V | |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
The 2316352 is the device-level element in a Phoenix Contact power supply installation. It receives the field signals and control supply listed above — 24 V DC (IEC 61131-2) — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in DIN-rail control cabinets, sensor and relay supplies, backplane bus power, where the unit is matched to the original catalog number and the enclosure provides 35 mm DIN rail (IEC 60715) support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Phoenix Contact 2316352 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 2316352; verify the catalog number against your bill of materials before requesting a quotation.
Datasheets and compliance documents are available on request; quote the full catalog number when enquiring.
Q.Where can I find the humidity data for 2316352?
It is listed in the specification table for Phoenix Contact 2316352 as 10 % ... 95 % (non-condensing). Compare it with the nameplate of the installed unit before ordering.
Q.For 2316352, what does the specification table state about rated torque?
The specification table lists rated torque = 0.5 Nm ... 0.6 Nm for Phoenix Contact 2316352. Confirm this figure against the unit currently in the panel.
Q.Which value is published under certifications for catalog number 2316352?
For 2316352, certifications is given as CE, UL, cULus. Use the value as the reference when sourcing a current-production equivalent.
Q.What should I include in an enquiry for 2316352?
Send the full catalog number 2316352, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 2316352.
Q.How do I confirm compatibility of 2316352 before ordering?
Match the catalog number 2316352 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.
Standard (US & Canada, tracked courier): delivered in 5–8 business days. In-stock items are processed within 2–4 business days. USD 25 flat rate on orders under $500.00; free on orders of $500.00 and above.
Express (DHL Express / FedEx International): upgraded expedited delivery in 2–4 business days. The Express surcharge is calculated at checkout based on destination and order weight.
Non-Stock / On-Order items ship on request: dispatch time is confirmed before your order — see our Shipping Policy. Shipping charges and available services are displayed at checkout. See the Shipping Policy for details.
Every product is covered by a 12-month seller warranty provided by SHLY-PLC, effective from the date of delivery, against defects in materials and workmanship under normal use.
This warranty does not cover damage from misuse, improper installation, power surges, neglect, unauthorized repair, or normal wear and tear. See our Return Policy for warranty-claim instructions.
No reviews yet. Be the first to review this product!
